Mounting the Dome Camera using the Camera Mounting Holes
Perform the following procedure if you will be mounting the camera to a surface where the clamps cannot
be used to secure the camera.
1. Use the mounting template to drill four mounting holes and an entry hole for the camera.
2. Insert the sealing grommet with all the required cables pulled through into the cable entry hole on the
bottom of the camera. For more information on using the sealing grommet, see
through the Sealing Grommet on
3. Drive four screws through the mounting holes to fasten the camera to the wall.
Mounting the Dome Camera using the Camera Mounting Holes
page 20.
Inserting Cables
29