Motorola HMVC3075 Quick Start Manual

Motorola HMVC3075 Quick Start Manual

Wireless motion sensor camera
Hide thumbs Also See for HMVC3075:


Quick Start Guide

Wireless Motion
Sensor Camera
Sold by:
Toll Free: (877) 389-0000


Table of Contents

Summary of Contents for Motorola HMVC3075

  • Page 1: Quick Start Guide

    Quick Start Guide HMVC3075 Wireless Motion Sensor Camera Sold by: Toll Free: (877) 389-0000...
  • Page 2: Controlling Your Camera

    Using your computer and the Wireless System Controller, you locally manage your home environment with the Motorola homesight™ software. When configured, the system can notify you of any new events by sending an e-mail when your Wireless Camera detects an event. An event is defined as motion in the field of view of the camera's heat/motion sensor.
  • Page 3: Installation Overview

    • The Motorola Wireless Motion Sensor Camera is constructed of UV-resistant ABS plastic. If installing the Wireless Motion Sensor Camera outside, it should be shielded from the elements, such as underneath a porch roof.
  • Page 4: Installing Your Camera

    Installing Your Camera Your camera can either be mounted on a wall or just sit on a level surface. Wall Mount Your Wireless Camera Make sure the power adapter cord is long enough to reach your mounting location. Also, be sure the AC outlet cannot be switched on and off with a wall-switch.
  • Page 5 Using the screws provided, secure the camera mounting bracket to the wall. Pull off the camera base by pulling straight down. The base detaches from the upper back side. Slide the camera down on to the bracket until it is firmly seated and you feel it click as the contacts engage.
  • Page 6: Troubleshooting

    Troubleshooting Problem Solution • Camera will not Ensure the camera is powered. • register with the USB Ensure that the USB Device Controller is powered and online. • Device Controller Ensure you are pressing the Discovery button. • Reposition the camera closer to the USB Device Controller. •...
  • Page 7: Features And Specifications

    The USB Device Controller does not recognize the camera during discovery mode? Make sure your USB Device Controller indicates discovery mode and that the camera is using the proper power supply (9 volt). Press the Discovery button found inside of the battery compartment. If this continues to fail, you will need to try another location for the camera.
  • Page 8: Regulatory Information

    Motorola, Inc., Connected Home Solutions, 101 Tournament Drive, Horsham, PA 19044, 1-215-323-1000, declares under sole responsibility that the HMVC3075 complies with 47 CFR Parts 2 and 15 of the FCC Rules as Class B digital devices. Industry Canada ICES-003 Statement This Class B digital apparatus complies with Canadian ICES-003.
  • Page 9: Limited Warranty

    Product, you assume full responsibility for the selection of the Product for its installation and use. While every reasonable effort has been made to insure that you will receive a Product that you can use and enjoy, Motorola does not warrant that the functions of the Product will meet your requirements or that the operation of the Product will be uninterrupted or error-free.
  • Page 10 Motorola, Inc. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Table of Contents