Related Manuals for Motorola Avigilon H4SL-D
Summary of Contents for Motorola Avigilon H4SL-D
- Page 1 Installation Guide Avigilon H4 SL Dome Camera Models with In-Ceiling Mounting Adapter: H4SL-D/H4SL-DO plus H4SL-MT-DCIL...
- Page 2 Important Safety Information This manual provides installation and operation information and precautions for the use of this device. Incorrect installation could cause an unexpected fault. Before installing this equipment read this manual carefully. Please provide this manual to the owner of the equipment for future reference. This Warning symbol indicates the presence of dangerous voltage within and outside the product enclosure that may result in a risk of electric shock, serious injury or death to persons if proper precautions are not followed.
- Page 3 Regulatory Notices This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003.
- Page 4 Legal Notices © 2016 - 2020, Avigilon Corporation. All rights reserved. AVIGILON, the AVIGILON logo, AVIGILON CONTROL CENTER, and ACC are trademarks of Avigilon Corporation. ONVIF is a trademark of Onvif, Inc. Other names or logos mentioned herein may be the trademarks of their respective owners. The absence of the symbols ™...
-
Page 5: Table Of Contents
Table of Contents Overview Cover View Adapter View Camera Base Bottom View Camera Base Front View Camera Base Rear View Installation Required Tools and Materials Camera Package Contents Installation Steps Removing the Dome Cover Inserting Cables through the Sealing Grommet Using the In-Ceiling Mounting Adapter Installing the Camera Base to the Mounting Adapter (Optional) Using the USB Wi-Fi Adapter... -
Page 6: Overview
Overview Cover View 1. In-ceiling mount adapter Used to mount the dome camera to a wall, ceiling or electrical box. 2. Dome cover Vandal resistant dome cover. Only available on H4SL-DO models. 3. Tamper resistant screws Star-shaped captive screws to fix the dome cover to the base. Overview... -
Page 7: Adapter View
Adapter View 1. Camera housing clips Snaps to hold camera module during installation. 2. Lanyard Connects to the lanyard anchor on the camera base. 3. Clamps Manually adjustable clamps for securing the dome camera to the ceiling. 4. Clamp retainer Used to hold the clamps together before installation. -
Page 8: Camera Base Bottom View
Camera Base Bottom View 1. Cable entry hole An entry hole for the cables required for camera operation. 2. Lanyard anchor The safety lanyard attaches to the anchor to prevent the camera from falling during installation. 3. Vent Vent to allow moisture vapor to escape the sealed housing and equalize pressure. Only available on H4SL-DO models. -
Page 9: Camera Base Front View
Camera Base Front View 1. IR illuminator Provides scene illumination in the IR spectrum. Only available on -IR models. 2. Ethernet port Accepts power and Ethernet connection to the network. The camera can only be powered by Power over Ethernet (PoE). Server communication and image data transmission also occur over this connection. -
Page 10: Camera Base Rear View
Camera Base Rear View Displayed IR illuminators only available on -IR models. 1. Azimuth control Provides control of the image angle. 2. Tilt lock thumb screw Provides a locking mechanism for the image tilt adjustment. 3. Pan lock latch Provides a locking mechanism for the image pan adjustment. 4. -
Page 11: Installation
Installation Required Tools and Materials The following tools are required to complete the installation but are not included in the package: Appropriate tool for cutting the entry hole in the mounting surface T20 Pin-In star-shaped driver Camera Package Contents Ensure the dome camera package contains the following: Avigilon H4 SL Dome Camera (Indoor model —... -
Page 12: Removing The Dome Cover
Removing the Dome Cover Note: Be careful not to scratch or touch the dome bubble. The resulting marks or fingerprints may affect the overall image quality. Keep the protective covers on the outside of the dome bubble until the installation is complete. Remove the dome cover by releasing the elastic strap holding the dome cover to the camera base. -
Page 13: Using The In-Ceiling Mounting Adapter
a. If the Ethernet cable is uncrimped, push the cable through the grommet. b. If the Ethernet cable is already crimped, place the grommet piercing cap on the Ethernet connector then push the cable through the grommet. Ensure that the orientation of the cable and grommet matches the one shown in the image. Using the In-Ceiling Mounting Adapter If the dome camera needs to be installed into a ceiling, you can discard the surface mount adapter that is provided with the dome camera and use the in-ceiling mounting adapter instead (H4SL-MT-DCIL). - Page 14 1. Use the in-ceiling mounting template to cut an entry hole for the camera into the ceiling. 2. Insert the in-ceiling mounting adapter into the entry hole then pull the sealing grommet with the required cables through the adapter. Using the In-Ceiling Mounting Adapter...
- Page 15 3. Pull off the clamp retainer holding the clamps in place. 4. Push the orange clamp handles up so that the metal arms extend outside the mounting adapter. Using the In-Ceiling Mounting Adapter...
-
Page 16: Installing The Camera Base To The Mounting Adapter
5. With your thumb on the outside edge of the mounting adapter and your forefinger on one of the orange clamp handles, pinch the clamp down until the clamp is secured. 6. Repeat the previous step on the other side. Make sure both clamps are level and horizontal. Installing the Camera Base to the Mounting Adapter After you install the mounting adapter, mount the camera base to the adapter. - Page 17 1. Attach the lanyard on the mounting adapter to the anchor on the camera base. 2. Pull the required Ethernet cable through the cable entry hole on the camera base. 3. Install the grommet into the cable entry hole on the camera base. Make sure the grommet flange is securely seated on the inside and outside of the cable entry hole.
-
Page 18: (Optional) Using The Usb Wi-Fi Adapter
5. Align the orange arrow on the camera base to the orange arrow on the mounting adapter, then press the camera base into the mounting adapter. The camera base clicks into place and is held securely. (Optional) Using the USB Wi-Fi Adapter If you have a USB Wi-Fi Adapter (H4-AC-WIFI), attach it to the camera's micro USB port to access the camera's mobile web interface. -
Page 19: Accessing The Live Video Stream
The mobile web interface using the USB Wifi Adapter. For more information, see (Optional) Using the USB Wi-Fi Adapter on the previous page. Device's web browser interface: http://<camera IP address>/. Network Video Management software application (for example, the Avigilon Control Center™ software). - Page 20 2. Loosen the tilt lock thumb screw to tilt the lens. 3. Adjust the tilt angle of the camera as needed. Aiming the Dome Camera...
-
Page 21: (Optional) Configuring Microsd Card Storage
Avigilon recommends that you adjust the tilt angle within the range indicated by the markings for best results. Tilting the camera past these markings is possible, but may result in infrared reflections beyond an acceptable level. 4. Lock the pan lock latch and tighten the tilt lock screw to secure the dome camera’s position. 5. -
Page 22: Installing The Dome Cover
Installing the Dome Cover 1. Attach the dome cover to the base by tightening the screws with the Torx driver. 2. Remove the protective cover on the outside of the dome bubble. Zooming and Focusing the Dome Camera Ensure this procedure is performed after the dome cover is installed so you can accommodate for the focus shift caused by the dome bubble. -
Page 23: For More Information
If the camera is connected to the Avigilon Control Center system, you can use the client software to configure the camera. For more information, see the Avigilon Control Center Client User Guide. If the camera is connected to a third-party network management system, you can configure the camera's specialty features in the camera's web browser interface. -
Page 24: Connection Status Led Indicator
Connection Status LED Indicator Once connected to the network, the Connection Status LED indicator will display the progress in connecting to the Network Video Management software. The following table describes what the LED indicator shows: Connection State Connection Status Description LED Indicator Obtaining One short flash... -
Page 25: Removing The Dome Camera From The Mounting Adapter
Removing the Dome Camera from the Mounting Adapter 1. Loosen the star-shaped screws and remove the dome cover. 2. Locate the small orange arrows that point at the camera housing clips. 3. Insert a flat head screwdriver or grommet piercing cap against one of the camera housing clips. 4. -
Page 26: Resetting To Factory Default Settings
Resetting to Factory Default Settings If the device no longer functions as expected, you can choose to reset the device to its factory default settings. Use the firmware revert button to reset the device. The firmware revert button is shown in the following diagram: 1. -
Page 27: Setting The Ip Address Using The Arp/Ping Method
Setting the IP Address Using the ARP/Ping Method Complete the following steps to configure the camera to use a specific IP address: Note: The ARP/Ping Method will not work if the Disable setting static IP address through ARP/Ping method check box is selected in the camera's web browser interface. For more information, see the Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide. -
Page 28: Specifications
Specifications Camera Lens 3-9 mm, motorized, varifocal USB Port USB 2.0 SD Storage microSD/microSDHC/microSDXC slot – minimum class 6; class 10/UHS-1 or better recommended Network Network 100Base-TX Cabling Type CAT5 Connector RJ-45 ONVIF® compliance version 1.02, 2.00, Profile S (www.onvif.org) Device SNMP v2c Management SNMP v3... - Page 29 Finish Fog coat, cool grey Adjustment Range 360° pan, 30° – 95° tilt, ±180° azimuth Electrical Power H4SL-D — 4 W max Consumption H4SL-DO — 7 W max Power Source PoE: IEEE802.3af Class 3 compliant RTC Backup 3V manganese lithium Battery Environmental Operating H4SL-D —...
- Page 30 KN 32 Electromagnetic EN 55024 Immunity EN 61000-6-1 EN 50130-4 KN 35 Specifications...
-
Page 31: Limited Warranty And Technical Support
Limited Warranty and Technical Support Avigilon warranty terms for this product are provided at avigilon.com/warranty. Warranty service and technical support can be obtained by contacting Avigilon Technical Support: avigilon.com/contact-us/. Limited Warranty and Technical Support...