Installing the Dome Cover
Note:
Before installing the dome cover, we recommend that you first connect to the camera and adjust the
aim, zoom, and focus so that the camera covers the required field of view. For more information, see:
Connecting to the Camera on page 49
l
Aiming the Dome Camera on page 50
l
Zooming and Focusing the Dome Camera on page 50
l
Be careful not to touch or scratch the dome bubble. Any marks or fingerprints on the dome bubble will
cause unwanted reflections in the -IR model.
1. Attach the lanyard to the dome cover.
2. Remove the plastic cover on the inside of the dome bubble.
3. Attach the dome cover to the base by tightening the screws with the star-shaped key.
4. Remove the plastic cover on the dome bubble.
Installing the Dome Cover
38