Download  Print this page

Motorola Avigilon 1.3C-H5SL-BO1-IR Installation Manual

Hide thumbs

Advertisement

Installation Guide
Avigilon H5SL Bullet Camera Models:
1.3C-H5SL-BO1-IR
3.0C-H5SL-BO2-IR
2.0C-H5SL-BO1-IR
5.0C-H5SL-BO1-IR
3.0C-H5SL-BO1-IR
5.0C-H5SL-BO2-IR

Advertisement

Table of Contents
loading

  Summary of Contents for Motorola Avigilon 1.3C-H5SL-BO1-IR

  • Page 1 Installation Guide Avigilon H5SL Bullet Camera Models: 1.3C-H5SL-BO1-IR 2.0C-H5SL-BO1-IR 3.0C-H5SL-BO1-IR 3.0C-H5SL-BO2-IR 5.0C-H5SL-BO1-IR 5.0C-H5SL-BO2-IR...
  • Page 2 Legal Notices ©  2019, Avigilon Corporation. All rights reserved. AVIGILON, the AVIGILON logo, AVIGILON CONTROL CENTER, and ACC are trademarks of Avigilon Corporation. Other names or logos mentioned herein may be the trademarks of their respective owners. The absence of the symbols ™ and ® in proximity to each trademark in this document or at all is not a disclaimer of ownership of the related trademark.
  • Page 3 Important Safety Information This manual provides installation and operation information and precautions for the use of this device. Incorrect installation could cause an unexpected fault. Before installing this equipment read this manual carefully. Please provide this manual to the owner of the equipment for future reference. This Warning symbol indicates the presence of dangerous voltage within and outside the product enclosure that may result in a risk of electric shock, serious injury or death to persons if proper precautions are not followed.
  • Page 4 Regulatory Notices This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003.
  • Page 5: Table Of Contents

    Table of Contents Overview Mounting Bracket View Rear View Front View Configuration Panel View Side View Installation Camera Package Contents Installation Steps Mounting the Bullet Camera Removing the Configuration Panel Cover (Optional) Using the USB Wi-Fi Adapter Assigning an IP Address Accessing the Live Video Stream Aiming the Camera Zooming and Focusing the Camera...
  • Page 6: Overview

    Overview Mounting Bracket View 1. Camera mounts Points for installing the camera to the mounting bracket. 2. Mounting hook slots Points to hold the camera to the mounting bracket while connecting the required cables. 3. Mounting holes Holes for securing the mounting bracket to the mounting surface. Overview...
  • Page 7: Rear View

    Rear View 1. Ethernet port Accepts power and Ethernet connection to the network. The camera can only be powered by Power over Ethernet (PoE). Server communication and image data transmission also occur over this connection. 2. Serial number tag Device information, product serial number and part number label. 3.
  • Page 8: Front View

    Front View 1. IR illuminator Provides scene illumination in the IR spectrum. 2. Configuration panel cover Covers the configuration panel. Front View...
  • Page 9: Configuration Panel View

    Configuration Panel View 1. microSD card slot Accepts a microSD card for onboard storage. For more information, see (Optional) Configuring microSD Card Storage on page 13. 2. Micro USB port Accepts a micro USB to USB adapter. Only required when using the Avigilon USB Wi-Fi Adapter. 3.
  • Page 10: Side View

    Side View 1. Sun shroud An adjustable cover to help protect the lens against glare from the sun. 2. Mount arm Adjustable mount arm for positioning the camera. 3. Adjustment screws Provides a locking mechanism for the mount arm. Side View...
  • Page 11: Installation

    Installation Camera Package Contents Avigilon H5SL Bullet Camera Mounting template sticker 4 screws and anchors for solid walls Installation Steps Complete the following sections to install the device. Mounting the Bullet Camera If the cables for the camera will not be provided from inside the mounting surface, install the junction box first (H4-BO-JBOX).
  • Page 12 3. Fasten the mounting bracket to the mounting surface or junction box. Note: It is recommended that silicone sealant be applied around the edge of the mounting bracket or junction box to prevent moisture from entering the mounting surface. 4. Insert the mounting hooks on the rear of the camera into the mounting hook slots on the mounting bracket, then let the camera hang.
  • Page 13 5. If there are external input or output devices that need to be connected to the camera (for example: door contacts, relays, etc.), connect the devices to the camera's digital I/O connector cables. For more information see Connecting to External Audio and I/O Devices on page 15.
  • Page 14 8. Connect the network cable to the camera's Ethernet port. 9. Tuck the extra lengths of cables into the cable entry hole. 10. Raise the camera until it covers the mounting bracket. Mounting the Bullet Camera...
  • Page 15: Removing The Configuration Panel Cover

    11. Use the camera mounting screws to fasten the camera to the bracket. Removing the Configuration Panel Cover 1. Use a T20 Pin-In star-shaped driver to unscrew the configuration panel cover. 2. Remove the cover from the configuration panel. (Optional) Using the USB Wi-Fi Adapter If you have a USB Wi-Fi Adapter (H4-AC-WIFI), attach it to the camera's micro USB port to access the camera's mobile web interface.
  • Page 16: Assigning An Ip Address

    Note: The camera will reserve the 10.11.22.32/28 subnet for internal use while the USB Wi-Fi Adapter is plugged in. Assigning an IP Address The device automatically obtains an IP address when it is connected to a network. Note: If the device cannot obtain an IP address from a DHCP server, it will use Zero Configuration Networking (Zeroconf) to choose an IP address.
  • Page 17 1. Loosen the adjustment screw closest to the mounting bracket to rotate the camera arm. 2. Loosen the center adjustment screw to tilt the camera. 3. Loosen the adjustment screw on the camera to turn the camera body. Aiming the Camera...
  • Page 18: Zooming And Focusing The Camera

    4. If the camera is turned sideways to look vertically at a scene, you can remove the sun shroud then re- install it to cover the camera's new angle of view. Zooming and Focusing the Camera In the camera web browser interface or the Avigilon Control Center software, use the camera’s Image and Display settings to zoom and focus the camera.
  • Page 19: For More Information

    If you have the USB Wifi Adapter, you can access the mobile web interface to configure the camera. For more information, see Avigilon USB Wi-Fi Adapter System User Guide. If you have installed multiple cameras, you can use the Avigilon Camera Configuration Tool to configure common settings.
  • Page 20: Connecting To External Audio And I/O Devices

    Connecting to External Audio and I/O Devices Important: This product is intended to be supplied by Power over Ethernet (PoE). Do NOT connect auxiliary power to the audio or I/O wires or the camera will be damaged. WARNING — This product is intended to be supplied by Power over Ethernet (PoE) that is a “Limited Power Source”...
  • Page 21: Connection Status Led Indicator

    Connection Status LED Indicator Once connected to the network, the Connection Status LED indicator will display the progress in connecting to the Network Video Management software. The following table describes what the LED indicator shows: Connection State Connection Status Description LED Indicator Obtaining One short flash...
  • Page 22: Resetting To Factory Default Settings

    Resetting to Factory Default Settings If the device no longer functions as expected, you can choose to reset the device to its factory default settings. Use the firmware revert button to reset the device. The firmware revert button is shown in the following diagram: Figure 1: The firmware revert button in the Configuration Panel.
  • Page 23: Setting The Ip Address Using The Arp/Ping Method

    Setting the IP Address Using the ARP/Ping Method Complete the following steps to configure the camera to use a specific IP address: Note: The ARP/Ping Method will not work if the Disable setting static IP address through ARP/Ping method check box is selected in the camera's web browser interface. For more information, see the Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide.
  • Page 24: Limited Warranty And Technical Support

    Limited Warranty and Technical Support Avigilon warranty terms for this product are provided at avigilon.com/warranty. Warranty service and technical support can be obtained by contacting Avigilon Technical Support: avigilon.com/contact-us/. Limited Warranty and Technical Support...