Download  Print this page

Installing Your Camera; Wall Mount Your Wireless Camera - Motorola HMVC3075 Quick Start Manual

Wireless motion sensor camera
Hide thumbs

Advertisement

Installing Your Camera

Your camera can either be mounted on a wall or just sit on a level surface.

Wall Mount Your Wireless Camera

Make sure the power adapter cord is long enough to reach your mounting location. Also, be sure the AC outlet cannot
be switched on and off with a wall-switch.
Warning, when mounting near a window, drilling too close to the glass could break the glass and possibly cause it to
shatter. The window extends deeper into the frame than can be seen; therefore, ensure your screw is beyond the
glass before drilling.
1
Using the holes on the drilling template found later in this guide, mark the position of the holes to be
drilled.
For drywall or other composite surfaces use a 7/32" drill bit. Drill a hole for each of the mounting
screws and insert a plastic wall anchor into each hole.
For other solid surfaces, use a 1/16" drill bit. Drill a pilot hole for each of the mounting screws.
Drill holes in
these positions
1.11 in
4

Advertisement

loading

  Also See for Motorola HMVC3075