Installing The Dome Cover; Zooming And Focusing The Dome Camera; Configuring The Camera - Motorola Avigilon 1.3C-H4SL-D Installation Manual

1. Insert a microSD card into the camera.
CAUTION — Do not force the microSD card into the camera or you may damage the card
and the camera.
2. Access the camera's web interface to enable the onboard storage feature. For more information, see
the Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide.

Installing the Dome Cover

1. Attach the dome cover to the base by tightening the screws with the Torx driver.
2. Remove the protective cover on the outside of the dome bubble.
Zooming and Focusing the Dome Camera
Ensure this procedure is performed after the dome cover is installed so you can accommodate for the focus
shift caused by the dome bubble.
Note: If the H4SL-DO camera model is powered while the temperature is below -30 °C (-22 °F), the
zoom and focus may be disabled for the first 45 minutes while the camera warms up.
In the camera web browser interface or the Avigilon Control Center software, use the camera's Image
l
and Display settings to zoom and focus the camera.
a. Use the zoom buttons to zoom the camera in or out.
b. Click Auto Focus to focus the lens.
c. Use the focus near and far buttons to manually adjust the focus.

Configuring the Camera

Once installed, use one of the following methods to configure the camera:
Installing the Dome Cover 17