Download  Print this page

Installation; Camera Package Contents; Installation Steps; Removing Protective Material Inside Dome Cover - Motorola Avigilon H4 Series Installation Manual

Ptz dome camera
Hide thumbs

Advertisement

Installation

Camera Package Contents

Ensure the camera package contains the following:
Avigilon H4 PTZ Dome Camera
l
PTZMH-MT-NPTA1 kit:
l
1 ½" male NPT adapter
o
PTZMH-ACCS-CABL1 kit:
l
1 ½" NPT locking nut
o
T20 Torx key
o
Teflon Sealing Tape
o
RJ-45 crimp-on plug and weather-resistant housing
o
External Power wiring harness
o
External I/O wiring harness
o
Ensure the pendant wall mount (CM-MT-WALL1) package contains the following:
Pendant wall mount
l
Mounting template sticker
l
T20 Pin-In star-shaped driver
l
4 concrete anchors (#8-10)
l
4 screws (#8 x 1.25)
l
RJ-45 grommet piercing cap
l
Teflon sealing tape
l

Installation Steps

Complete the following sections to install the device.

Removing Protective Material Inside Dome Cover

The PTZ dome camera is packaged with protective material inside the dome cover to prevent damage to
the camera and dome bubble during shipping. The protective material must be removed before the PTZ
dome camera is installed.
Installation
4

Advertisement

Table of Contents
loading

  Also See for Motorola Avigilon H4 Series

  Related Manuals for Motorola Avigilon H4 Series

This manual is also suitable for:

Avigilon 2.0c-h4ptz-dp30Avigilon 1.0c-h4ptz-dp45