Table of Contents
Advertisement
Power over Ethernet (PoE) Class 3 — If PoE is available, the camera LEDs will turn on.
o
External Power — Connect an external 12 V DC or 24 V AC power source through the brown
o
and blue auxiliary power cables.
Important: Be careful not to connect power to the audio input cable, doing so will
permanently damage the camera. Both the audio input cable and auxiliary power
cable are brown. To distinguish the auxiliary power cable, it is labeled AUX PWR and
has a thicker gauge.
6. Check that the Connection Status LED indicator indicates the correct state. For more information, see
Connection Status LED Indicator on
Mounting the Camera
Once all the cable connections have been made, secure the camera to the mounting bracket.
1. Tuck the extra lengths of cables into the cable entry hole.
2. Secure the camera to the mounting bracket:
a. Raise the camera until it covers the mounting bracket.
b. Use the camera mounting screws to fasten the camera to the bracket.
Mounting the Camera
page 28.
16
Advertisement
Table of Contents
