Steps In Commissioning - Siemens SIMATIC LOGO! CMR2020 Operating Instructions Manual

Installation, connecting up, commissioning

4.6 Steps in commissioning

4.6 Steps in commissioning
To commission the CMR, follow the steps below:
Overview of commissioning
1. Note the requirements for operating the CMR, refer to the section Requirements for use
(Page 23).
2. SIM card: Before you insert the SIM card, note the information in Insert the SIM card and
enter the PIN (Page 33) regarding the two different methods:
– Method 1: For a new device
– Method 2: Replacing the SIM card in a device that has already been in use.
3. Connect a PC with a Web browser to the local interface X1P1 of the CMR, refer to the
section Establishing a connection to the CMR (Page 49).
4. Insert the SIM card, see section "Insert the SIM card and enter the PIN (Page 33)".
5. Connect the antennas.
6. Connect the CMR to the power supply.
7. Enter the PIN of the SIM card via the Web user interface of the CMR, refer to the section
PIN of the SIM card (Page 79).
8. Align the antenna, refer to the section "Wireless cell (Page 82)".
9. Set up the CMR according to your requirements, refer to the section Configuration
(Page 47).
32
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01