Siemens SIMATIC LOGO! CMR2020 Operating Instructions Manual page 106

Operation
7.2 Monitoring
Adding a new event
1. In the lower part of the page, click the "Add" button.
2. An input box and two drop-down lists are then available for the configuration:
Name
– Freely selectable symbolic name for the event.
Signal name
– Select the relevant signal from the drop-down list.
Event
– You define the event. Examples:
3. Depending on the selection you have made in "Signal name" and "Event", further buttons
will become available with which you can complete your event.
4. If you click the "Apply" button, the entries you have made are adopted.
Result: Your event is adopted and displayed in the list.
Deleting an event
Note
Elements that are being used cannot be deleted
You can only delete an element (signal, text, user, recipient group, event, action) if the
element is unused.
If the element is used, e.g. a user in a recipient group or a signal in an event, you cannot
delete the element.
1. In the list, select the row with the event you want to delete.
2. Click the "Delete" button.
A prompt for confirmation is displayed.
3. If you confirm this, the event is deleted and removed from the list.
Changing an event
1. In the list, select the row with the event you want to change.
2. Change the event with "Change event" in the lower part of the page.
Result: If you click the "Apply" button, your modified event is adopted and displayed in the
list.
106
All the signal definitions you have configured along with their symbolic names are
available.
The digital input changes from "1" to "0".
The analog flag falls below or exceeds the value you specify this point.
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01