Procedure
To configure access via the mobile wireless network, follow the steps below:
1. First establish a configuration connection between the CMR and a connected PC. To do
this, use an Ethernet patch cable.
See Establishing a connection to the CMR (Page 49)
2. Configure the mobile wireless connection:
See Mobile wireless settings (Page 77)
3. Configure the device using the WBM.
5.2
Mobile wireless communication with LOGO! BM
Figure 5-2
Mobile wireless communication with LOGO! BM
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01
5.2 Mobile wireless communication with LOGO! BM
Application examples
39