Table of Contents
Advertisement
Operation
7.2 Monitoring
Assignments
You assign certain actions to the defined events, for example sending an SMS message to a
particular recipient group if an output of the BM changes.
In the lower part of the page under "If:" and "Then:" you will see which action will be
executed along with all the set parameters.
7.2.4
Overview
Figure 7-6
All configured signal definitions of the BM and the CMR are displayed with symbolic names
and their current status.
After resetting to factory settings, the inputs and outputs of the CMR are displayed as when
shipped.
98
Monitoring – "Overview" tab
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01
Hide quick links:
Advertisement
Table of Contents
