Recipient Groups - Siemens SIMATIC LOGO! CMR2020 Operating Instructions Manual

Operation
7.1 Users / groups
7.1.3

Recipient groups

Figure 7-4
In this tab, you set up your recipient groups or make changes to recipient groups that have
already been set up.
You can set up a maximum of five groups each with ten users per group.
If you click the "Apply" button, all the settings you made in the "Recipient groups" tab are
adopted.
Add new group
1. Click the "Add" button.
2. Enter any name and a description for the group.
In the lower part of the page you will find all the users you have entered and their phone
numbers in brackets.
3. Select the check boxes of all users you want to include in the new group.
4. If you click the "Apply" button, the settings you have made are adopted.
Your new group is now set up and is displayed in the list.
Note
To send SMS messages, you require groups and users.
92
Users / groups - "Recipient groups" tab
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01