Siemens SIMATIC LOGO! CMR2020 Operating Instructions Manual page 52

Configuration
6.2 Establishing a connection to the CMR
Symbol
Procedure for configuration
Note
After configuration: If necessary adapt the network interface
After configuration of the CMR, it may be necessary to adapt the network interface of the
locally connected computer or network.
Follow the steps below to configure the CMR:
1. Select the required Web page in the navigation panel.
2. Make your settings in the appropriate tab on the page you have opened.
3. If the "Apply" button is available: Always confirm your entries by clicking this button.
Result: Your settings are then adopted by the device.
Incorrect entries during configuration
The CMR checks your entries. hen you save, consistency errors and invalid characters are
recognized automatically: The relevant input box is highlighted with a red boundary. With
some incorrect entries an additional message is also displayed. The settings are only applied
after the error has been corrected.
Saving the configuration
You can save your settings in a configuration file. This file can, when necessary, then be
reloaded or transferred to other devices of the same type. For more detailed information,
refer to section Configuration (Page 65).
52
Meaning
Number of active sessions
Shows the number of active sessions
Automatic update active
Regular updating of the page content of the WBM is activated.
Automatic update inactive
Regular updating of the page content of the WBM is deactivated.
Print
By clicking this button, you can print out the content of the page
you are currently viewing.
Help
By clicking this button, you go to the Internet start page of Sie-
mens Industry Online Support.
Open source software license texts
By clicking this button, you can download the OSS license texts.
Operating Instructions, 09/2014, C79000-G8976-C356-01
LOGO! CMR2020 / LOGO! CMR2040