Wireless Cell - Siemens SIMATIC LOGO! CMR2020 Operating Instructions Manual

Configuration
6.8 WAN
6.8.4

Wireless cell

Figure 6-13
To obtain useful status information:
● Enable the mobile wireless interface in the Mobile wireless settings tab.
Optimum antenna alignment
To allow you to find the optimum alignment of the antenna connected to the SMA socket,
you can use the "Wireless cell" tab. The "Wireless cell" tab allows you to test the signal
strength at various antenna positions.
The information is updated at intervals of a few seconds. To be able to find the optimum
position, you receive immediate information about the signal strength at the test positions.
Status of the wireless cells
You will find information about the mobile wireless cell where the CMR is currently booked
in:
● Signal quality: Amount of correctly transferred data/amount of all transferred data
● Signal strength
● Identifier of the wireless cell in the mobile wireless network: ID of the wireless cell
● Location area code
Identifier for the current location of the CMR within the mobile wireless network.
82
WAN – "Wireless cell" tab
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01