Siemens SIMATIC LOGO! CMR2020 Operating Instructions Manual page 73

Configuration of the logging
To load the configuration of the logging from online support onto the CMR, follow the steps
below:
1. Click the "Browse" button.
2. From your local PC, select the configuration file provided by online support, for example
"Ticket123456.sup".
3. Click the "Load" button.
4. After successful transfer, the "Activate logging and save on SD card" check box is
enabled.
Deleting the configuration of the logging
To delete a loaded configuration again:
● Click the "Delete" button.
The "Activate logging and save on SD card" check box is disabled and grayed out again.
The CMR is once again in normal operation.
Activating logging
After successful transfer of the configuration file:
1. The "Activate logging and save on SD card" check box is enabled.
2. Start the logging by selecting the check box and clicking the "Apply" button.
Note
To spare the SD card: Deactivation recommended
To spare the SD card (working life), deactivate this function again after your problem has
been solved:
• Deselect the "Activate logging and save on SD card" check box.
• If you click the "Apply" button, you adopt this setting.
Deactivating logging
If you remove a loaded logging configuration, the check box is disabled and grayed out. The
CMR is once again in normal operation.
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01
Configuration
6.6 Maintenance
73