Siemens SIMATIC LOGO! CMR2020 Operating Instructions Manual page 66

Configuration
6.6 Maintenance
Load Configuration
Load configuration from PC
With this function a configuration created previously and saved on the PC is loaded on the
CMR.
Configuration files have the file extension ".cfg".
1. To search for configurations on the PC, click the "Browse" button.
2. Double-click on the required configuration file.
3. To load the configuration on the CMR, click the "Load" button.
Result: The uploaded configuration is now used.
Load configuration from SD card
With this function a configuration created previously and saved on the SD card is loaded on
the CMR.
The name of the stored configuration file is "user.cfg".
● To load the configuration on the CMR, click the "Load from SD card" button.
Result: The uploaded configuration is now used.
Saving the configuration
Saving a configuration on PC
Note
Editing configurations with a text editor
When editing configurations with a text editor (e.g. Notepad), make sure that you save the
configuration in the UTF-8 format and that you do not use any special characters; in other
words only ASCII characters.
You can do the following with a configuration of the CMR:
1. Save it on the PC.
2. If necessary transfer it to other devices of the same type.
● Click the "Save on PC" button.
● Select the relevant storage location.
66
LOGO! CMR2020 / LOGO! CMR2040
Operating Instructions, 09/2014, C79000-G8976-C356-01