Communication - Siemens interranger DPS300 Instructional Manual

Communication

Note
The communication protocol is automatically detected by the DPS300 and shown
via LED on the motherboard.
Serial: RS-232
Bipolar Current
Connect the Milltronics BIC-II (if required) to the Peripheral Communications terminals
as below.
SmartLinx
Refer to the appropriate SmartLinx manual for installation and wiring information.
7ML19981BC01
Ground shield at
to customer device,
RS-232 port
15m (50 ft) max
refer to BIC-II instruction manual
Beldon 8760 (or equivalent), 18
AWG, 2 wire, shielded/twisted,
1500 (5000 ft) max.
39
RS-485
one end only.
to customer device,
1200m (4,000 ft) max
to RS-232 or RS-422 host
device, 15 m (50 ft), or 1200m
(4,000 ft) max respectively.
RS-485 port
01/22/99
InterRanger DPS300