Keypad - Program Mode - Siemens interranger DPS300 Instructional Manual

Keypad – Program Mode
In the program mode, use the DPS300 programmer keys to perform the identified
functions.
function keys
display.
—
left).
reset).
7ML19981BC01
shift access to Point Number, Parameter Number, or Parameter Value
input the numeric value into the accessed display.
input a Parameter Value decimal point (moves Profile and TVT Pointers
input a negative Parameter Value (moves Profile and TVT Pointers right).
delete the current Parameter Value display (initiate a parameter reset).
store the current Parameter Value in memory (complete a parameter
switch the Parameter Value to % or Units (access Auxiliary Parameter
Function).
increase the accessed display value.
decrease the accessed display value.
take an ultrasonic measurement.
enter the RUN mode.
43
numeric value keys
InterRanger DPS300