Keypad - Run Mode - Siemens interranger DPS300 Instructional Manual

Keypad – Run Mode
In the RUN mode, the following programmer keys perform the identified functions.
function keys
selects the Auxiliary Reading "mA output value for the Point Number displayed".
selects the Auxiliary Reading "clarifier wastewater temperature".
selects the Auxiliary Reading "rate of sludge level change".
selects the Auxiliary Reading "failsafe time left" (in percent).
selects the Auxiliary Reading "parameter value" (Key in any Parameter Number).
selects the Auxiliary Reading "sludge level" (may be operator altered via P731).
selects the Auxiliary Reading "distance" (sludge level to transducer face).
initiates program mode access (see
switches the Reading between
access).
stops/starts the Point Number auto display scroll.
selects the next Point Number (when auto display scroll is stopped).
selects the previous Point Number (when auto display scroll is stopped).
InterRanger DPS300
).
"Units/percent of Span" (completes program mode
50
auxiliary reading
keys
7ML19981BC01