Vertiv Liebert GXT5 Series Installer/User Manual page 63

NOTE: We recommend using the Google Chrome browser.
4� Upload the update file using the card's user interface, see Figure 5-5 below�
a� Select the "GXT5" tab, then the File Transfer folder in the tab-menu pane on the left-hand side of the page�
b� On the file-transfer page, click Choose File, and select the DSP upgrade file, then click Transfer file�
c� Enter the Username and Password, then click Login�
The factory-defaults:
Username : Liebert (case-sensitive)
Password: Liebert (case-sensitive)
NOTE: The name and password may have been changed from the default. Be sure to obtain the user name
and password from an administrator.
The status of the transfer displays in the File Transfer Status section� After about 2 minutes, the UPS restarts and
the web page refreshes�
NOTE: The transfer process takes about 2 minutes. Do not leave or close the page until the status is "Update
Complete."
d� You can check the firmware version, select the System folder in the tab-menu pane on the left-hand side of the
page, and check the Firmware Version field, see Figure 5-6�
Figure 5-5 File Transfer on the RDU101 User Interface
58 Maintenance