Related Manuals for Uniden Elite 9135
Summary of Contents for Uniden Elite 9135
- Page 1 ELITE 9135 Series For more exciting new products please visit our website: Australia: www.uniden.com.au New Zealand: www.uniden.co.nz...
- Page 3 Elite 9135 Series Owner’s Manual What's in the box? You will also find: Accessory handset and charger Elite 9135 base with answering system and Not pictured: cordless handset Recha rgeable battery (BT-694 or BT-694s) MOBILE Battery cover Belt clip AC adapter...
-
Page 4: Table Of Contents
What’s in the manual? Getting Started ....... 3 DND (Do Not Disturb) ........18 Multihandset Features .......18 Installing Your Phone ........3 Voice Message Notification ....20 Setting Up the MobileLink Bluetooth™ Connection ......4 Using the Answering System ..20 Getting to Know Your Phone ..6 Answering System Options (Ans. -
Page 5: Getting Started
GETTING STARTED Installing Your Phone Charge the Battery 1. Unpack all handsets, battery packs, and battery covers. If you need to remove a cover, press in on the notch and slide the cover down and off. Line up the battery connector with the jack inside the handset;... -
Page 6: Setting Up The Mobilelink Bluetooth™ Connection
With the MobileLink feature, you can essentially treat your mobile ♦ phone as a second line. You can use the Elite 9135 handset to make and receive calls on your mobile phone number, put mobile phone calls on hold, and transfer calls to other handsets. See page 11 for more information. - Page 7 Elite 9135 asks which moBIle phone you want to connect to. If you are using the Elite 9135 to talk on one Bluetooth phone, the ♦ Elite 9135 will not ring if a call comes in on another phone.
-
Page 8: Getting To Know Your Phone
( While playing a message: decrease the speaker volume. In standby: increase the ringer volume. uP ( While playing a message: increase the speaker volume. Bluetooth The number indicates the Bluetooth device number device number linked to the Elite 9135. -
Page 9: Parts Of The Handset
Parts of the Handset Display MENU/ 12-key INTERCOM/ MESSAGE/ Earpiece SELECT MOBILE dial pad CLEAR MUTE Charging contacts Microphone REDIAL/ SPEAKER HOME/ PHONEBOOK DOWN Visual PAUSE FLASH Headset ringer jack Key (icon) What it does In standby: increase the ringer volume. During a call: increase the audio volume. -
Page 10: Reading The Display
Privacy Mode is on: no other handset can join the call. The operation using is available. down Bluetooth device number linked to the Elite 9135. 1 2 3 4 [Aa] [aA] Enter 1) capital or 2) lower case letters (see page 10). -
Page 11: Using The Handset Menu
You can select a caller and play back the message (see page 22). Menu Bluetooth Use the Bluetooth menu to pair a mobile phone to the Elite 9135 and select a mobile phone if you pair more than one. Menu Handset Setup You can change these settings separately for each handset. -
Page 12: Entering Text On Your Phone
Menu Option What it does Key Touch Tone Have the keypad sound a tone when you press a key. LCD Contrast Change the contrast of the display. Menu Ans. Setup Refer to page 20 for details on setting up your answering system. Menu Date &... -
Page 13: Using Your Phone
enter a blank space switch between upper and lower case letters rotate through the punctuation and symbols USING YOUR PHONE This section explains the most common functions on the phone. To... From the land line From the mobile phone If two or Press moBIle. -
Page 14: Using Your Bluetooth Connection
Using Your Bluetooth Connection After you have paired your mobile phone with the Elite 9135 (see page 4), you can make and receive calls from your mobile phone through the Elite 9135. To use the Bluetooth menu options, press with the phone in moBIle standby, then select a mobile phone. -
Page 15: Using The Caller Id And Redial Lists
Using the Caller ID and Redial Lists Caller ID (CID) is a service available from your telephone provider that shows the phone number (and sometimes the caller’s name) of incoming calls. Contact your telephone provider for more information. Caller ID list Redial list The phone saves the information for the last Each handset remembers... -
Page 16: Using Call Waiting
For individual record options, find a number (and review the detail for a CID record), and then press to display the following options: menu/select Menu Option What it does Delete Erase the number from the list. Add the number to the phonebook. The phone Store Into PH BK displays the Edit Name screen (see page 16). -
Page 17: Using The Phonebooks
Only one cordless handset can access the phonebook at a time. ♦ Downloading mobile phonebooks into your phone Make sure your mobile phone is paired to the Elite 9135 and is within range of the base. With the Elite 9135 in standby, open the menu and select Bluetooth. -
Page 18: Chain Dialing
For individual entry options, find a number and press twice to menu/select display the following options: To... Press... save this mobile twice to open the menu, then select menu/select phonebook entry to Store Into PH the home phonebook edit the current entry twice to open the menu, then select Edit. -
Page 19: Using Special Features
USING SPECIAL FEATURES Call Block If you subscribe to Caller ID, you can save phone numbers to the call block list. When a call comes in, the phone compares the received phone number to the numbers on the call block list. If the phone number is on the list, the phone replaces the caller's name with Call Blocked blocks the call. -
Page 20: Dnd (Do Not Disturb)
9 accessory handsets. Your base also supports a total of 6 XDECT R002 range extenders ♦ Visit the Elite 9135 page on the website for compatible repeaters. You must register accessory handsets to the base before using them. ♦... -
Page 21: Privacy Mode
Privacy Mode To activate privacy mode on a land line call in progress, press menu/ twice. As long as privacy mode is on, you’ll see a in the display, select and no other handsets can join your call. Privacy mode turns off automatically when you hang up;... -
Page 22: Voice Message Notification
To... Press... make an intercom . Select the handset you want to talk InteRcom/cleaR page with, or to page all handsets at the same time. cancel a page answer a page InteRcom/cleaR Home/FlasH end an intercom call . Both handsets return to standby. Voice Message Notification If you subscribe to a voice mail service, your phone can notify you when you have a new message. -
Page 23: Personalizing The Greeting
Menu Option What it does Have the system beep every 15 seconds when you have Message Alert a new message. The alert stops after you listen to all your new messages or if you press any key on the base. Call Screen Turn on the call screen feature (see page 23). -
Page 24: Accessing The Answering System
Accessing the Answering System When the phone’s in standby, you can access the system from any handset using two different methods: Message Manager and Play Messages. Regardless of which method you use to get your messages, the following conditions apply: Only 1 handset can access the system at ♦... -
Page 25: Using The System While You're Away From Home
To... From the base From a handset replay an Within 2 seconds after a message starts playing, earlier press select (number key). Rev. message skip a message Press Select (number key). While a message is playing, delete a message press select (number key). -
Page 26: Important Information
Remember to make a note of your new security code! Dialing In to Your System Call your phone number and wait until the system answers. (If the system is turned off, it answers after 15 rings and sounds a series of beeps.) # and immediately enter your During the greeting or beeps, press... - Page 27 Audio issues Possible solutions Move the handset closer to the base. Callers sound Keep the handset’s battery fully charged. weak or soft. Increase the earpiece volume. Check for interference from appliances (microwave ovens, TVs, etc.) or wireless devices (baby monitors, WiFi equipment, etc.).
- Page 28 Making sure your phone has Bluetooth turned on. Checking if the Elite 9135 is on the paired device list on your mobile phone and is in connected status. If not, try pairing again.
-
Page 29: Resetting Handsets
Plug the filter into the telephone wall jack and plug the base into the filter. Make a test call to make sure the noise is gone. Liquid Damage CAUTION: If the base is covered in liquid, disconnect the adapter and phone cord from the wall before touching it. -
Page 30: Adapter And Battery Information
Do not charge the batteries in any charger other than the one ♦ specified in the owner's manual. Using another charger may damage the battery or cause it to explode. Rechargeable batteries must be recycled or disposed of properly. Uniden works to reduce lead content in our products and accessories. -
Page 31: One-Year Limited Warranty
Elements of Warranty: Uniden warrants to the original retail owner for the duration of this warranty its UNIDEN Elite 9135 (hereinafter referred to as the Product), to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. - Page 32 ©2011 Uniden Australia Pty Ltd/Uniden New Zealand Limited Printed in Vietnam U01UN268BZZ(0)
Need help?
Do you have a question about the Elite 9135 and is the answer not in the manual?
Questions and answers
Why is the red light flashing on the phone - there are no messages
The red light may flash to indicate a voice message is waiting. If there are no new messages, the message indicator could be triggered falsely. This can happen if the system memory is full or if the message waiting notification was not cleared. Try deleting old messages or resetting the system to clear the indicator.
This answer is automatically generated