EcoWater Timetronic 314 User/Installer Handbook page 29

Table of Contents

Advertisement

SETTING A LITRES OR GALLON (US)
MEASURE
Press select.The display will ~I'lash~the current
Press (+) once t o activate the litre count
se,tting.The unit is factory set t o display litres
mode.
and all water flow rate and usage displays are
Press (-) once t o activate the U.S. gallon
shown in this mode.
count mode.
MAXIMUM DAYS BETWEEN
RE-CHARGE SElTING
Press select once. The display will flash the
current setting. The unit is factory set to
automatically cor~trol all re-charges with
intervals based on water usage.
Press
(+)
to set a m a x i m ~ ~ m time in days
between re-charges. Each press of the
(+)
button advances 1 day. When set the unit will
re-charge after the set n ~ ~ m b e r of days since
the last re-charge irrespective of water
usage.
We recommend for maximum efficiency that
the unit is normally set to AUTO. However,
households with exceptionally low water
useage may require to have a setting other
than AUTO.
/
\
r'r
17
L t
T
C l
RECHARGE
\
J
DISPLAY THE AUTOMATIC
RECHARGE OPTION
switched t o 'ON' in Industrial settings t o
automatically initiate a recharge once 97%
Press select once. The display will flash
of the. capacity was depleted.
between '97' and '0FF:This setting would be
This is not advised in a domestic application.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Timetronic 314 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Sensatronic 514Sensatronic 518Sensatronic 3000-r30

Table of Contents

Save PDF