EcoWater Timetronic 314 User/Installer Handbook page 24

CHECK 'THE SETTINGS
Pressing'tlie SELECT button runs you through
Press Select again
the different stages of the programming.
Recharge tinie is displayed and flashes.
Press Select once
Press Select again
Time will flash and show the present time.
Average daily litres used is displayed.
Press Select again
Press Select again
Water hardness will flash and shows setting.
Returns t o the operation mode.
*NOTE TO INSTALLER
ONCE SETTINGS ARE PROGRAMMED AS REQUIRED
YOU MAY RETURN TO PAGE 10.
READINGTHE CHARGE BAR DISPLAY
The charge bar is continually displayed and
are about t o have an influx of weekend guests
shows at a glance the percentage of water
and want t o ensure that you will not deplete
softening capacity remaining. Following a
your water softening capacity then check the
recharge, the charge bar returns t o the 100%
unit status. If it is below 50% it may be wise
charge position.
t o initiate an irr~mediate recharge or set the
TI- is
is a useful feature as it allows you t o see
machine t o recharge that night.
at a glance the status of your machine. If you
TO RECHARGE TONIGHT
The unit can be prograrr~med t o
sufficient softened water supply for an
recharge at the next pre-programmed
expected heavy water usage the next day.
time, regardless of its remaining capacity.
Simply press the RECHARGE button once.
This is particularly beneficial t o ensure a
"Recharge" tonight will flash on the display.
/
7
CHARGE
-
m
100%
. . .
511%
RECP4$1FIGG RMW96HT
:
-
L
/