EcoWater Timetronic 314 User/Installer Handbook page 26

POWER CUTS
If tlie electrical power t o the water softener is
cut your demand for water will be less as
interrupted, the time display is blank, but the
most appliances will not work and so a
'memory' built into the faceplate will keep the
recharge should not be necessary.
correct time for up t o
72 hours.
When electrical power is returned,
1 of 2
The water softener will not recharge but will things will happen.
pass softened water. In the case of a power
Power off up to
72
hours
The display returns and is steady. No operation is necessary.
F
\
CHARGE
-
.loo%
. .
I I ' U U
50%
.
I .
-
\
1
01
Power off over
72
hours
The display returns and flashes.
Only the time requires re-setting.
The Model code, hardness. and recharge
time will not have been lost as they are
stored.
Even if the time is incorrect after a long
period tlie water softener will continue t o
work but will recharge at what it believes
the time t o be.
Re-set the time as described in the
Programming Section (see page 19).
/
\
CHARGE
-
.loo%
. .
/ . I
U
' 1- 1
1- 1
:
.
50%
. .
PRESENT TIME
-m
-
\
1
If a sudden power cut occurs, the memory
may be drained by a11 electrical 'surge'.
Although rare, the unit can lose its time
memory immediately. Proceed as per 2
above should this happen.