EcoWater Timetronic 314 User/Installer Handbook page 27

ADVANCED OPTION FOR SENSATRONIC MODELS
This section provides instruction on how
t o enter the secondary functions of the
Sensatronic programme. By entering the
secondary function you may monitor
the performance of your unit and most
importantly manage your household
water usage.
If you are in any part of an operation you do
not recognise do not touch any buttons for
2 minutes. The display automatically returns
t o the present time mode.
WARNING
' T he settings for your water softener have
been calculated t o produce the most efficient
usage of your water. Any change t o these
settings will result in your unit working
inefficiently.
THE SECONDARY FUNCTIONS
TOTAL WATER USAGE SINCE
seconds. The display will show the total
INSTALLATION
volume of softened water used since the unit
was installed. ' T he reading will be in litres
Press and hold the select button for .three (European) or gallons (United States).
MEASURING THE WATER FLOW RATE
reading is Zero, open a tap connected t o the
softened supply t o achieve a reading. If the
Press select once. The unit will now display reading is still Zero check that the inlet, outlet
the water flow in litres or U.S. gallons per
and bypass valves are set as per diagram (l?6),
minute through the water softener. If the and that the meter is connected as on page 8.
r
\
L
t-
/'r
0.0
FLOW
\
/