Download Print this page
EcoWater WaterWorks Demand WS 1000 Installation Manual
EcoWater WaterWorks Demand WS 1000 Installation Manual

EcoWater WaterWorks Demand WS 1000 Installation Manual

Demand automatic water conditioner

Advertisement

Quick Links

WaterWorks
Demand
AUTOMATIC WATER CONDITIONER
Model WS 1000
Installation
Operation
Maintenance
Repair Parts
IF YOU HAVE QUESTIONS
WHEN
INSTALLING,
OPERATING
AND
MAINTAINING
YOUR
CONDITIONER,
AND WHEN SETTING
THE TIMER...
CALL TOLL FREE
1-800-86
WATER
Manufactured
by EcoWater Systems, Inc.
PO BOX 64420,
ST. PAUL,
MN 55164
Part No. 7213921
(10/99)

Advertisement

loading

Summary of Contents for EcoWater WaterWorks Demand WS 1000

  • Page 1 Operation Maintenance Repair Parts IF YOU HAVE QUESTIONS WHEN INSTALLING, OPERATING MAINTAINING YOUR CONDITIONER, AND WHEN SETTING THE TIMER... CALL TOLL FREE 1-800-86 WATER Manufactured by EcoWater Systems, Inc. PO BOX 64420, ST. PAUL, MN 55164 Part No. 7213921 (10/99)
  • Page 2 WaterWorks TM..AUTOMATIC WATER CONDITIONER I III WaterWorks RESIDENTIAL WATER SOFTENER WARRANTY FULL ONE YEAR WARRANTY ON WATER SOFTENER For one year from the date of purchase, when this water softener is installed and maintained in accordance with our instructions, Sears will repair, free of charge, defects in material or workmanship in this water softener. FULL TEN YEAR WARRANTY AGAINST LEAKS...
  • Page 3 WaterWorks ..AUTOMATIC WATER CONDITIONER UNPACKING / INSPECTION The softener is completely assembled at the factory, shipping cartons. except as required at installation, and is shipped Small parts, needed to install the softener, are on a 1 master carton. skin-packed cardboard piece.
  • Page 4 WaterWorks ..AUTOMATIC WATER CONDITIONER SPECIFICATIONS / DIMENSIONS MODEL WS 1000 RATED CAPACITY See Rating Decal, Located On The Softener 4O / ,77 AMOUNT OF HIGH CAPACITYRESIN (Ibs ! cuft) 8x40 RESIN TANK NOMINAL SIZE (in., dia x height) SERVICEFLOW RATE (gpm) See Rating Decal WATERSUPPLYMAXIMUM HARDNESS (gpg)®...
  • Page 5 WaterWorks ..AUTOMATIC WATER CONDITIONER BEFORE STARTING INSTALLATION WHERE TO INSTALL THE SOFTENER • Place the softener as close as possible to the Put the softener in a place water damage is least pressure tank (well system) or water meter (city likely to occur if a leak develops.
  • Page 6 WaterWorks TM ..AUTOMATIC WATER CONDITIONER TYPICAL INSTALLATION ILLUSTRATION (BRINE TANK NOT SHOWN) HARD WATER TO SOLDERED COPPER, OR CPVC _.,_," OUTSIDEFAUCETS SOFT WATER []... INCLUDED BYPASS VALVE AT SOFTENER straight connector (2) * included with softener 3/4" pipe nut (2) * []...
  • Page 7 WaterWorks ..AUTOMATIC WATER CONDITIONER INSTALLATION STEPS INSTALL BYPASS VALVE, OR OPTIONAL FIGURE 1 INLET-OUTLET ADAPTORS: clip NOTE: On Demand turbine timer models, "/ ]///z_ valve sure the turbine and OUTLET I outlet support are firmly in r_/lq __L (remove place, in the valve u 41 i---"...
  • Page 8 WaterWorks TM ..,. AUTOMATIC WATER CONDITIONER INSTALLATION STEPS, continued IMPORTANT: If you will use the grounding clamps back-pressure that could reduce brine draw during and wire in step 7 on page 9, put the clamps on the regenerations. copper tubes before soldering.
  • Page 9 WaterWorks ..AUTOMATIC WATER CONDITIONER INSTALLATION STEPS, continued valve, pausing several times to allow the softener INSTALL GROUNDING CLAMPS to pressurize slowly. WIRE (IF NEEDED): E. After about 3 minutes, open a HOTwater fau- • To maintain electrical ground continuity in the cet for 1 minute, or until all air is expelled, then close.
  • Page 10 WaterWorks ..AUTOMATIC WATER CONDITIONER PROGRAMMING THE DEMAND TIMER up button display / ------- down button TOUCH-HOLD button -------- SELECT button WATER CONDITIONER I_ TIMER SETTINGS REQUIRED...upon installation, and after an extended power outage (see Pro- gram Memory, page 17). NOTES: •...
  • Page 11 WaterWorks ..AUTOMATIC WATER CONDITIONER PROGRAMMING THE DEMAND TIMER, continued • SET WATER HARDNESS NUMBER ...continued NOTE: Each press of a button changes the display You can get the grains per gallon (gpg) hardness by 1 between 1 and 25. Above 25, the display of your water supply from a water analysis...
  • Page 12 WaterWorks ..AUTOMATIC WATER CONDITIONER WATER AND WATER CONDITIONING WATER ............... Man's very existence depends on water. It is 1 of the Municipal water supplies come from surface reser- basic commodities of life. Water is best as nature voirs, such as lakes and rivers, or from underground provides it, is a common misconception.
  • Page 13 WaterWorks ..AUTOMATIC WATER CONDITIONER WATER AND WATER CONDITIONING, continued water• In some instances, treatment may improve heaters, and other water using appliances. In can colloidal iron water, but always CONSULT A QUALI- also damage and cause premature failure of seals, FIED WATER CHEMISTRY LAB before attempting...
  • Page 14 WaterWorks ..AUTOMATIC WATER CONDITIONER WATER FLOW THROUGH SOFTENER SOFT WATER SERVICE FILL soft water hard water soft water hard water salt storage s_tstorage tank tank not shown} brine valve brine valve resin tank resin bed fill water BRINING / BRINE RINSE BACKWASH FAST RINSE...
  • Page 15 WaterWorks ..AUTOMATIC WATER CONDITIONER GENERAL WATER SOFTENER MAINTENANCE CHECKING THE SALT STORAGE LEVEL, AND REFILLING ......Brine (salt dissolved in water) is needed for each pure. NUGGET, PELLET or coarse SOLAR salts are and every regeneration. The water for making brine recommended.
  • Page 16 WaterWorks ..AUTOMATIC WATER CONDITIONER GENERAL WATER SOFTENER MAINTENANCE, continued CLEANING THE NOZZLE AND VENTURI ASSEMBLY ......A clean nozzle and venturi is needed for the soft- ener to work right. This small unit makes the suc- tion to move brine from the salt storage area to the can_ resin...
  • Page 17 WaterWorks ..AUTOMATIC WATER CONDITIONER DEMAND TIMER FEATURES, AND SERVICE NOTE: SEE PAGES 10 AND 11 TO SET THE TIMER TO THE CORRECT TIME OF DAY, WATER HARD- NESS NUMBER, AND RECHARGE START TIME. NORMAL OPERATION, TIMER DISPLAYS # • •...
  • Page 18 WaterWorks ..AUTOMATIC WATER CONDITIONER DEMAND TIMER FEATURES, AND SERVICE, continued ERROR CODE DISPLAYED Err 05 Err01 Err02 Err03 Err04 POSSIBLE wiringharness, or connectionto switch i positionswitch 0 motorinoperative timer (PWA) valve defectcausing hightorque DEFECT TO REMOVE AN ERROR CODE: (1) unplug transformer (2) correct defect (3) plug transformer in (4) Wait for at least 6 minutes.
  • Page 19 WaterWorks ..AUTOMATIC WATER CONDITIONER DEMAND TIMER FEATURES, AND SERVICE, continued If you don't get a reading in the display, with faucet button to manualty advance valve into each open, pull the sensor from the valve outlet port. Pass cycle and check correct switch operation.
  • Page 20 WaterWorks ..AUTOMATIC WATER CONDITIONER DEMAND TIMER FEATURES, AND SERVICE, continued drain hose cause back pressure, stopping the brine tank by shining a flashlight into the brine- brine draw. well and observing a noticeable drop in the liquid level. 3. Again, press the TOUCH - HOLD button to move the softener into backwash.
  • Page 21 WaterWorks ..AUTOMATIC WATER CONDITIONER WATER FLOW THROUGH VALVE SERVICECYCLE FILL CYCLE position switch valve cam venturi rotor & disc from Valve Inlet fill flow from Valve Inlet (hard water) plug (hard water) fill water .top distributor (soft) top distributor To Valve Outlet (soft water) resin tank...
  • Page 22 WaterWorks ..AUTOMATIC WATER CONDITIONER REPAIR PARTS - SOFTENER ASSEMBLY 31-.-p'_ j Jl 28 _29...
  • Page 23 WaterWorks ,M ..AUTOMATIC WATER CONDITIONER REPAIR PARTS - SOFTENER ASSEMBLY PART PART DESCRIPTION OF PART DESCRIPTION OF PART 7207718 7178626 Hose Clamp (2) 7207726 Ground Wire 7155115 Brinewell Cover 7176292 7082150 Clamp Section (2) Wing Nut, 1/4-20 7088033 710O819 BrineweU C_amp Retainer (2) 7112963...
  • Page 24 WaterWorks ..AUTOMATIC WATER CONDITIONER REPAIR PARTS - VALVE ASSEMBLY IDENTIFI- OUTSIDE CENTER CATION DIA. HOLE NUMBER DIA. ,138 1-EP .295 HVDC .295 ACTUAL SIZES (excluding center hole) 0501228 7092615 7097252 \\43 AVAILABLE OPTION for installing softener withoutincludedby- pass vane...
  • Page 25 WaterWorks TM ..AUTOMATIC WATER CONDITIONER REPAIR PARTS - VALVE ASSEMBLY PART PART DESCRIPTION OF PART DESCRIPTION OF PART 7070412 Screw, #4-24 x 1-1/8" O-ring Seal, 3-3/8" x 3-5/8" _7117816 Spacer O-ring Seal, 3/4" x 15/18" 7030713 Switch O-ring Seal, 7/16" x 5/8" 7077472 7129716 Expansion Pin...
  • Page 26 WaterWorks ..AUTOMATIC WATER CONDITIONER NOTES...
  • Page 27 WaterWorks ..AUTOMATIC WATER CONDITIONER NOTES...