Power Cuts - EcoWater Timetronic 314 User/Installer Handbook

POWER CUTS
If electrical power t o the timer is interrupted,
the "memory" built into the timer circuitry
keeps all settings for a minirnl-~m of 6 hours.
The display is blank and the softener will not
recharge, although it will provide softened
water.
When electrical power is returned,
1 of 3
things will happen.
\
a
a
The present time of day is
0
displayed. The settings have
been kept.
0
0,
\
El
[m=
/ E
-
LlLl
0
A time will be flashing. This
indicates that the settings will need
t o be re-programmed as the unit
0
has returned t o factory settings.
To reset, proceed t o the beginning
of this section and repeat each
0
operation.
If the water softener was in a
recharge cycle this will now flash,
and the process will continue.