7.1.2 Channel System + Zone Speaker - Pioneer SC-LX904 Instruction Manual

„ 7.1.2 Channel System + ZONE SPEAKER
MAIN ROOM
ZONE 2
MAIN ROOM: This is a combination of the 7.1 Channel System and front high speakers. A front high speaker is a type of
height speaker. You can select only one set of height speakers from the following three types for connection.
‰ Front High Speakers/Rear High Speakers Installation Example (
‰ Ceiling Speakers Installation Example (
‰ Dolby Enabled Speakers (Dolby Speakers) Installation Example (
ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where
this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
Contents
ZONE B
(LINE OUT)
p26)
p27)
p28)
Connections
≫
67
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p203)
Speaker Setup
7.1.2 ch
1 ch
Height 1 Speaker Front High
Height 2 Speaker ---
Zone Speaker Zone 2
Speaker B
Zone 2
Zone 2 Preout
• Speaker Channels: 7.1.2 ch
• Subwoofer: 1ch
• Height 1 Speaker: Select the type of
height speaker actually installed.
• Height 2 Speaker: ---
• Zone Speaker: Zone 2
• Speaker B: No
• Zone 2 Preout: Zone 2
• Bi-Amp: No
• Symmetry / All Channel Adjust / Front
Align ( p203)
Setup
To output the video and audio of the
HDMI input to ZONE 2, from the Home
screen, set "System Setup" - "Input/
Output Assign" - "TV Out/OSD" - "Zone
2 HDMI" ( p153) to "Use".
≫