Combination Example When Dolby Enabled Speakers Are Used At The Front - Pioneer SC-LX904 Instruction Manual

‰ Combination example when Dolby Enabled
Speakers (Front) are used at the front
About the Dolby enabled speakers (front)
b
a: 22° to 30°, b: 120°
The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (front) are installed on top of the front speakers.
When the Dolby enabled speakers (front) are used in front, the combination of
the height speakers at the rear can be selected from the following 3 examples
shown at the right.
7,8 Dolby Enabled Speakers (Front)
Contents
a
Connections
≫
(Example 1) Use top rear speakers at the rear
c
c: 125° to 150°
The top rear speakers are installed on the ceiling at rear of the listening position,
and the width between the left and right speakers is optimal to match the one for
the front speakers.
9,10 Top Rear Speakers
(Example 2) Use rear high speakers at the rear
The width between the rear high speakers should match the one for the front
speakers, and they should be installed minimum of 3'/0.9 m higher than the front
speakers, and tilted so they will point toward the listener.
9,10 Rear High Speakers
‰ Speaker Layouts and Selectable Listening
Modes ( p136)
35
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
3´ (0.9 m)
or more
≫