To Non-Arc Tv - Pioneer SC-LX904 Instruction Manual

To Non-ARC TV

ARC
5 V 500 mA
eARC
HDMI OUT
4K HDR USB
a b
a HDMI cable, b Digital optical cable
Contents Connections
≫
If the TV does not support the ARC (Audio Return Channel) function (*), connect
an HDMI cable and digital optical cable.
• If you use a cable set-top box, etc. connected to the input jack of this unit to
watch TV (without using a TV's built-in tuner), connection with a digital optical
cable or analog audio cable is not required.
• Another TV or projector can be connected to the HDMI OUT SUB jack. Switch
between MAIN and SUB using the HDMI MAIN/SUB button (
remote controller or "AV Adjust" (
compatible.
• If devices with different resolutions are connected to HDMI OUT MAIN jack
and SUB jack, images are output with the lower resolution.
• If a 4K high-quality video is played, use a Premium High Speed HDMI
Cable or Premium High Speed HDMI Cable with Ethernet whose package
has a "PREMIUM Certified Cable" label. Furthermore, in Home, displayed
by pressing
Assign" - "TV Out/OSD" - "HDMI 4K Signal Format" (
(*) ARC function: This function transmits the audio signals of the TV via an
HDMI cable, and plays the audio of the TV on this unit. Connection to an ARC-
compatible TV is complete with one HDMI cable. To check if the TV supports the
ARC function, refer to the instruction manual of the TV, etc.
TV
79
Playback
≫
p198). Note that this jack is not ARC-
on the remote controller, set "System Setup" - "Input/Output
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫
p15) on the
p153) to "Enhanced".