5.1 Channel System + Speaker B (Bi-Amping The Speakers) - Pioneer SC-LX904 Instruction Manual

„ 5.1 Channel System + SPEAKER B (Bi-Amping the Speakers)
＊ ＊
 Speaker B
Apart from the main speaker system (Speaker A System), you can also connect another system of front speakers to be the
Speaker B System and build a 5.1 Channel System (
the same audio for output with Speaker A/B/A+B. Switch Speakers with "Speakers" in "AV Adjust" (
You can connect a Speaker B System that support bi-amping to improve the quality of the bass and treble. Make sure
you remove the jumper bar fitted between the woofer jacks and tweeter jacks of the bi-amping speakers. Also refer to the
instruction manual for your speakers.
Contents
ZONE B
(LINE OUT)
For high-
frequency
For low-frequency
Speaker B
p19). When connected as a Speaker B System, you can switch
Connections
≫
p199).
51
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p203)
Speaker Setup
5.1 ch
1 ch
Height 1 Speaker ---
Height 2 Speaker ---
Zone Speaker
Speaker B Bi-Amp
Zone 2
Zone 2 Preout
• Speaker Channels: 5.1 ch
• Subwoofer: 1ch
• Height 1 Speaker: ---
• Height 2 Speaker: ---
• Zone Speaker: No
• Speaker B: Bi-Amp
• Zone 2 Preout: Zone 2
• Bi-Amp: No
• Symmetry / All Channel Adjust / Front
Align ( p203)
≫