Pioneer SC-LX904 Instruction Manual page 45

(Example 2) Use rear high speakers at the rear
The width between the rear high speakers should match the one for the front
speakers, and they should be installed minimum of 3'/0.9 m higher than the front
speakers, and tilted so they will point toward the listener.
11,12 Rear High Speakers
(Example 3) Use Dolby Enabled Speakers (Surround) at the rear
The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (surround) are installed on top of the surround
speakers.
11,12 Dolby Enabled Speakers (Surround)
Contents
3´ (0.9 m)
or more
Connections
≫
(Example 4) Use Dolby Enabled Speakers (Surround Back) at the rear
The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (surround back) are installed on top of the surround
back speakers.
11,12 Dolby Enabled Speakers (Surround Back)
‰ Speaker Layouts and Selectable Listening
Modes ( p136)
45
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫