Speaker Configuration - Pioneer SC-LX904 Instruction Manual

displayed instead.
(Zone 2)
Setting Item Default Value
Input Selector ---
Network Service ---
Band ---
Station ---
• "Band" is displayed only when the input selector is set to "TUNER".
• "Station" is displayed only when the input selector is set to "TUNER" or "NET".
• "Network Service" is displayed only when the input selector is set to "NET".
• Preset Name of "Station" (only when the input selector is set to "TUNER") is displayed with the
name set by "Source" - "Name Edit". If the name is not set, the frequency of the radio station is
displayed instead.
(Zone 3)
Setting Item Default Value
Input Selector ---
Network Service ---
Band ---
Station ---
• "Band" is displayed only when the input selector is set to "TUNER".
• "Station" is displayed only when the input selector is set to "TUNER" or "NET".
• "Network Service" is displayed only when the input selector is set to "NET".
• Preset Name of "Station" (only when the input selector is set to "TUNER") is displayed with the
name set by "Source" - "Name Edit". If the name is not set, the frequency of the radio station is
displayed instead.
Setting Details
Displays the input selector that has been set.
Displays the Network Service that has been set.
Displays the band, "AM" or "FM" that has been set.
Displays the Preset Name of the radio station that
has been set.
Setting Details
Displays the input selector that has been set.
Displays the Network Service that has been set.
Displays the band, "AM" or "FM" that has been set.
Displays the Preset Name of the radio station that
has been set.
Contents Connections
≫
Speaker
„ Configuration
Change the settings of connection environment of the speakers.
Setting Item Default Value
Speaker 7.1.4 ch
Channels
Subwoofer 2ch
157
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch",
"7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", "5.1.2 ch",
"6.1.2 ch", "7.1.2 ch", "4.1.4 ch", "5.1.4 ch", "6.1.4
ch" or "7.1.4 ch" to suit the number of speaker
channels connected.
Set the PRE OUT SUBWOOFER jacks which
output audio signals.
"2ch": Both the PRE OUT SUBWOOFER 1 jacks
and the PRE OUT SUBWOOFER 2 jacks output
audio signals.
"1ch": Only the PRE OUT SUBWOOFER 1 jacks
output audio signals.
"No": Neither the PRE OUT SUBWOOFER 1 jacks
nor the PRE OUT SUBWOOFER 2 jacks output
audio signals.
≫