03
Installing your speaker system
At the very least, front left and right speakers only are necessary. Note that your main surround speakers should
always be connected as a pair, but you can connect just one surround back speaker if you like (it must be con-
nected to the left surround back terminal).
Standard surround connection
! When only connecting one surround back speaker, connect it to the SURROUND BACK L (Single) terminals.
The top middle terminals can also be used for the front wide and Speaker B speakers.
7.2 ch/5.2.2 ch setting
Top middle right
7.2 ch SB/FW setting
Front wide right
Speaker B - right
Front right
Subwoofer 1
LINE LEVEL
INPUT
AUDIO OUT
1
SUBWOOFER
PRE OUT
2
FRONT
R
L
AUDIO OUT
1
SUBWOOFER
PRE OUT
2
5.2ch
7.2ch
SPEAKER B
A
FRONT
CENTER
SURROUND
SURROUND BACK
TOP MIDDLE
R
L
R
L
R
L
(Single)
R
L
A
B
5.2.2ch
HDZONE / BI-AMP
5.2.2ch
Surround back speaker terminals can be
used to connect to the sub zone.
7.2 ch/5.2.2 ch setting
Surround back right
7.2 ch SB/FW setting
Surround back right
Surround right
Surround back right
ZONE 2 - Right
HDZONE - Right
Top middle left
Front wide left
Speaker B setting
Speaker B - left
Center
Subwoofer 2
LINE LEVEL
INPUT
5.2ch
7.2ch
SPEAKER B
TOP MIDDLE
CENTER
SURROUND
SURROUND BACK
R
L
R
L
R
L
(Single)
B
HDZONE / BI-AMP
5.2.2ch
5.2.2ch
Surround back left
Surround back left
Speaker B setting
Surround back left
ZONE 2 setting
ZONE 2 - Left
HDZONE setting
HDZONE - Left
Dolby Enabled Speaker
Dolby enabled speakers bring a new sense of height and immersion to the listening experience without installa-
tion of overhead speakers.
The front or surround speaker and Dolby Enabled Speaker are explained as one product group for the following
connections. Connect the
Standard surround connection
Front left
a Dolby Enabled Speaker as an independent product.
Surround left
25
Connecting your equipment (In case of VSX-90)
Ceiling
Dolby Enabled
Listener
Speaker
on
page 25
of the TOP MIDDLE terminal when using