Download  Print this page

Advertisement

> Before start > Hookup > Setup > Playback > Part Names
Basic
Manual
SC-LX901
AV RECEIVER
> Advanced Manual
Step1: Speaker Layout ........................................................... 3
Step2: Connect the Speakers ............................................... 10
Step3: Connect the TV ......................................................... 12
Step4: Connect the AV Components .................................... 14
Step5: Multi-zone Connection ............................................... 18
Step6: Connect Other Cables ............................................... 21
Step7: Power On & Initial Setup ........................................... 22
HDMI Setup .......................................................................... 23
Basic Playback ..................................................................... 24
Network Functions ................................................................ 25
Others ................................................................................... 27
Front Panel ........................................................................... 30
Rear Panel ............................................................................ 31
Remote Controller ................................................................ 32
Display .................................................................................. 32
Troubleshooting | Appendix

Advertisement

   Also See for Pioneer SC-LX901

   Summary of Contents for Pioneer SC-LX901

  • Page 1: Table Of Contents

    Step4: Connect the AV Components ........14 Step5: Multi-zone Connection ..........18 Step6: Connect Other Cables ..........21 Setup Step7: Power On & Initial Setup ........... 22 SC-LX901 HDMI Setup ................23 Playback Basic Playback ..............24 Network Functions ..............25 Others ...................
  • Page 2 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix What's in the box 1. Main unit 2. Remote controller (RC-927R) ×1, Batteries (AAA/R03) ×2 3. Indoor FM antenna ×1 4. AM loop antenna ×1 5.
  • Page 3: Hookup

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step1: Speaker Layout 7.1-Channel System Front speakers output front stereo sound and a center speaker outputs center sound such as dialogs and vocals. Surround speakers create back sound field.
  • Page 4 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Height Speakers; Front High Speakers/ Rear High Speakers These are types of height speakers. Furthermore, by 3´ (0.9 m) installing height speakers, you can select the Dolby or more Atmos listening mode, which realizes the most up-to-date 3D sound including overhead sounds, when the input...
  • Page 5 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Height Speakers; Ceiling Speakers These are types of height speakers. Furthermore, by installing height speakers, you can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D sound including overhead sounds, when the input format is Dolby Atmos.
  • Page 6 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Height Speakers; Dolby Enabled Speakers (Dolby Speakers) These are types of height speakers. Dolby enabled speakers are special speakers designed to face the ceiling so that sound is heard after bouncing off the ceiling so that sound appears to be coming from overhead.
  • Page 7 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Speaker B System Apart from the main speaker system (Speaker A System), you can also connect another system of front speakers to be the Speaker B System.
  • Page 8 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Bi-Amping the Speakers It is possible to connect front speakers, a center speaker, and surround speakers supporting Bi-Amping to improve quality of the bass and treble. The effects and placements for speakers are the same as for a system that doesn't use Bi-Amping speakers.
  • Page 9 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Speaker combinations In any of the combinations, up to two powered subwoofers can be connected. Speaker SURROUND SP B ZONE 2 ZONE 3 *...
  • Page 10: Step2: Connect The Speakers

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step2: Connect the Speakers Standard Connections Refer to the illustration to connect the speaker system. * Depending on the combination of speakers, you may need to connect to other jacks.
  • Page 11 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Connections with Bi-Amping speakers With a Center Speaker When using Bi-Amping connections for Front Speakers For high- frequency For low- frequency With Surround Speakers For high- For high- frequency...
  • Page 12: Step3: Connect The Tv

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step3: Connect the TV TV-1 (ARC TV) This describes the connections for a TV that supports the ARC (Audio Return Channel) feature. By connecting with a single HDMI cable, you can not only output the video input to this unit to the TV, but you can also play the sound from the TV through this unit.
  • Page 13 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix TV-2 (Non-ARC TV) This describes the connections for a TV that does not support the ARC (Audio Return Channel) feature. By connecting with both an HDMI cable and a digital optical cable, you can not only output the video input to this unit to the TV, but you can also play the sound from the TV through this unit.
  • Page 14: Step4: Connect The Av Components

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step4: Connect the AV Components HDMI AV Components This is an example of connection with an AV component that has an HDMI jack. With connection to an AV component that conforms with the CEC (Consumer Electronics Control) standard, you can use features such as the HDMI CEC feature that links with the input selector,...
  • Page 15 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Non-HDMI AV Components This is an example of connection with an AV component that does not have an HDMI jack. Make the connections to the AV component to match the jacks it has.
  • Page 16: Audio Components

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Audio Components Example of a connection with an Audio Component. Connect a CD player using a digital optical cable or analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack.
  • Page 17 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Component Video Monitor Use a component video cable to connect a TV or projector that has component video input jacks rather than an HDMI input jack.
  • Page 18: Step5: Multi-zone Connection

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step5: Multi-zone Connection ZONE 2 TV You can enjoy content from a Blu-ray Disc player on a TV equipped with an HDMI input jack in the separate room (ZONE 2) by playing a Blu-ray Disc player in the main room (where this unit is located), or play the content from another AV component.
  • Page 19 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix ZONE 2 PRE/LINE OUT / ZONE 2 SPEAKER You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2).
  • Page 20 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix ZONE 3 PRE/LINE OUT / ZONE 3 SPEAKER Along with the main room and ZONE 2, you can also enjoy audio in yet another room (ZONE 3). Connections with an AV component To output the audio of an external AV component to ZONE 3, connect using an analog audio cable.
  • Page 21: Step6: Connect Other Cables

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step6: Connect Other Cables Antenna Hookup Move the antenna around while playing the radio to find (North American (European and the position with the best reception. Use a thumb tack or models) Asian models) similar to attach the indoor FM antenna to a wall.
  • Page 22: Setup

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Step7: Power On & Initial Setup 1. Full Auto MCACC Place the supplied speaker setup microphone in the listening position, measure the test tones emitted by the speakers, then the unit automatically sets the optimum volume level for each speaker, the crossover frequencies, and the distance from the listening position.
  • Page 23: Hdmi Setup

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix HDMI Setup 2. Source Connection To switch between upper and lower case, select "A/a" on HDMI CEC the screen and press ENTER. To select whether to mask Make this setting to enable the control feature for devices the password with "*"...
  • Page 24: Playback

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Basic Playback AV Component Playback display of the main unit, then the listening mode Input source & volume selected automatically (Dolby Digital for multi- channel input signals, Stereo for 2 channel input 1.
  • Page 25: Network Functions

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Network Functions Network Services Player 11 or 12 network servers or NAS that are compatible with home network functionality. You may need to make some 1.
  • Page 26 8 paired devices. mode, press the button on the remote controller, Pioneer SC-LXXXX then in the Home displayed set "System Setup" – 0 The coverage area is 48 feet (15 meters). Note that "Hardware" – "Power Management" – "Network connection is not always guaranteed with all BLUETOOTH enabled devices.
  • Page 27: Others

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Others Listening To the Radio Multi-zone 1. Press TUNER (a) on the remote controller repeatedly to Play select either "AM" or "FM" on the display. 1.
  • Page 28: Part Names

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix AV Adjust "USB" input selector. Home that is displayed. 4. To adjust the volume on the power amplifier in the – When you have connected a TV in the separate room separate room or the ZONE speaker, adjust with VOL+/–...
  • Page 29 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Home When the unit is operating erratically When the subwoofer produces no sound When you press on the remote controller, the Home is Try restarting the unit If the setting of the front speakers is "Large"...
  • Page 30: Front Panel

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Front Panel 11 12 Part Names 1. INPUT SELECTOR dial: Switch the input to be played. standby mode, this lights when functions such as HDMI 19.RETURN button: Returns the display to the previous state.
  • Page 31: Rear Panel

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Rear Panel 1. COMPONENT VIDEO IN/OUT jacks: Transfer the video 7. HDMI OUT jacks: Transmit video signals and audio 13.IR IN/OUT port: Allows you to connect a multiroom signals of an AV component with a component video signals with a HDMI cable connected to a monitor such remote control kit.
  • Page 32: Remote Controller

    > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual Troubleshooting | Appendix Remote Controller Display 1. Í button: Turns the unit on or into standby mode. 2. Input selector buttons: Select the input to be played. Use the buttons in 3 to select "STRM BOX", "AUX", or "PHONO".
  • Page 33: License And Trademark Information

    License and Trademark Information “Alle andere handelsmerken zijn eigendom van de desbetreffende rechthebbenden.” PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks “Все товарные знаки являются собственностью соответствующих or registered trademarks of Pandora Media, Inc. Used with permission. владельцев.”...
  • Page 34 DISCLAIMER Through this device you are able to link to other services or websites which are not under the control of any company which has designed, manufactured or distributed/have distributed this device, and its affiliates (collectively, “Company”). We have no control over the nature, content and availability of those services.
  • Page 36 Корпорация О энд Пи 2-3-12, Яэсу, Чуо-ку, г. Токио, 104-0028, ЯПОНИЯ © 2016 Onkyo & Pioneer Corporation. All rights reserved. © 2016 Onkyo & Pioneer Corporation. Tous droits de reproduction et de traduction réservés. http://www.pioneer-audiovisual.com/privacy/ F1606-0 “Pioneer” and “MCACC logo” are trademarks of Pioneer Corporation, and are used under license.
  • Page 37: The Basic Manual Includes Information Needed When Starting Up And Also Instructions For Frequently Used Operations

    Settings System Setup ................7 MCACC Pro ................31 Network/Bluetooth ..............44 AV Adjust ................47 Control Function Settings ............49 SC-LX901 Connecting a Power Amplifier ..........50 Firmware Update ..............51 Listening Modes Selecting Listening Modes............. 54 AV RECEIVER Listening Mode Effects ............
  • Page 38: Main Features

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix include WAV, FLAC and DSD high-res source • Multi-zone Connection which allows you to play in the Main features main room and listen in a separate room (ZONE 2/ ZONE 3) •...
  • Page 39: General Specifications

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix (European) 43 Ω Multi channel simultaneous power output (1 kHz, 1%, 8 Ω) Headphone Rated Output General Specifications 880 W (11 ch total) 57 mW (32 Ω, 1 kHz, 10% THD) Rated power output (1 kHz, 4 Ω, 1%, 1 ch Driven) 280 W per channel ■...
  • Page 40: Specifications

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ HDMI ■ Audio Inputs FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles Input Digital A2DP 1.2 IN1 (BD/DVD, HDCP2.2), IN2 (CBL/SAT, HDCP2.2), OPTICAL 1 (GAME), 2 (CD), 3 (TV) AVRCP 1.3 IN3 (STRM BOX, HDCP2.2), IN4 (GAME, HDCP2.2), COAXIAL 1 (BD/DVD), 2 (CBL/SAT)
  • Page 41 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix – When "Bluetooth Wakeup" is set to "On" Specifications and features are subject to change without notice.
  • Page 42: About Hdmi

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix By connection a TV that supports ARC with a single HDMI Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, cable, you can not only output the audio and video from 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit About HDMI this unit to the TV, but also input the audio from the TV to...
  • Page 43: System Setup

    > Specifications > Specifications > Settings > Settings > Listening Modes > Playback Function > Listening Modes > Playback Function > Basic Manual > Basic Manual Troubleshooting | Appendix Troubleshooting | Appendix Input/Output Assign System Setup Make settings related to output to the TV, change the settings for jack allocations to the various input selectors, and set the feature for displaying operations on the TV (OSD), etc.
  • Page 44 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ HDMI Input Setting Item Default Value Setting Details You can change input assignment between the input selectors and HDMI IN jacks. Impose OSD Set whether or not to display the information on the TV when the volume is adjusted or input is changed, for example.
  • Page 45 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Video Input ■ Digital Audio Input You can change input assignment between the input selectors and COMPONENT VIDEO You can change input assignment between the input selectors and DIGITAL AUDIO IN IN jack and the VIDEO IN jacks.
  • Page 46 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Analog Audio Input ■ Input Skip You can change input assignment between the input selectors and AUDIO IN jacks. If you You can skip inputs to which nothing is connected when selecting them with the INPUT do not assign a jack, select "-----".
  • Page 47 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Speaker Setting Item Default Value Setting Details Height 1 Speaker Top Front Set the speaker type if height speakers are You can make changes to the connection environment of the speakers and change the connected to the HEIGHT 1 terminals.
  • Page 48 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Setting Item Default Value Setting Details Height 2 Speaker Top Rear Set the speaker type if height speakers are Zone Speaker Set the connection of speakers to Zone 2 or Zone connected to the HEIGHT 2 terminals.
  • Page 49 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Crossover Setting Item Default Value Setting Details Bi-Amp Set whether the speakers are bi-amp connected. Setting Item Default Value Setting Details "No": When speakers are not bi-amp connected to any speaker terminals Front Small...
  • Page 50 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Setting Item Default Value Setting Details Height 2 Small Set the low range capabilities for each channel by Crossover 80Hz When there are speakers that have been set to...
  • Page 51 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Distance ■ Channel Level Set the distance from each speaker to the listening position. Press on the remote Set the volume level of the speakers. If multiple settings are saved in the MCACC Memory, controller, and select the MCACC Memory first in "AV Adjust"...
  • Page 52 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Speaker"/"Height 2 Speaker" is set to "Dolby Speaker". Setting Item Default Value Setting Details Surr Back Right 0.0 dB Select a value between "−12.0 dB" and "+12.0 dB"...
  • Page 53 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Volume Audio Adjust Make advanced settings such as those related to multiplex audio or those related to the Setting Item Default Value Setting Details volume of this unit.
  • Page 54 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Source • To name a preset radio station, press TUNER on the remote controller, select AM/FM and select the preset number. • This cannot be set if the "NET", "USB" or "BT AUDIO" input is selected. Make settings for input sources, such as volume difference adjustments for each input selector for the connected equipment.
  • Page 55 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Hardware Setting Item Default Value Setting Details Fixed PCM Select whether to fix input signals to PCM (except Make settings related to the HDMI CEC, HDMI Standby Through, or ARC features, settings multi-channel PCM) when you have selected related to power management of the unit, such as Auto Standby and Network Standby, and "HDMI", "COAXIAL", or "OPTICAL"...
  • Page 56 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Setting Item Default Value Setting Details HDMI Standby When this is set to anything other than "Off", Audio TV Out You can enjoy audio through the speakers of the Through you can play the video and audio of an HDMI...
  • Page 57 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Power Management Setting Item Default Value Setting Details Auto Delay This setting automatically corrects any Setting Item Default Value Setting Details desynchronization between the video and audio Sleep Timer Allows the unit to enter standby automatically when signals based on data from the HDMI LipSync...
  • Page 58 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ 12V Trigger A Setting Item Default Value Setting Details Set when outputting the control signal (maximum 12 V/100 mA) through the 12V TRIGGER Network Standby When this feature is turned "On", you can turn OUT A jack.
  • Page 59 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Setting Item Default Value Setting Details CBL/SAT Set the 12V trigger output setting to each input. HDMI 6 Set the 12V trigger output setting to each input.
  • Page 60 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Setting Item Default Value Setting Details PHONO Set the 12V trigger output setting to each input. Set the 12V trigger output setting to each input. •...
  • Page 61 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ 12V Trigger B Setting Item Default Value Setting Details Set when outputting the control signal (maximum 12 V/25 mA) through the 12V TRIGGER CBL/SAT Set the 12V trigger output setting to each input.
  • Page 62 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Setting Item Default Value Setting Details HDMI 6 Set the 12V trigger output setting to each input. PHONO Set the 12V trigger output setting to each input.
  • Page 63 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Multi Zone Setting Item Default Value Setting Details Set the 12V trigger output setting to each input. Make settings related to Multi-zone Connection, such as the volume for the separate room. •...
  • Page 64 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Zone 3 Miscellaneous Setting Item Default Value Setting Details Change the frequency step for the tuner, update the firmware, and perform Initial Setup, etc.
  • Page 65 Select an ID for the unit's remote controller from SPEAKERS terminals you are not using on this unit. "1", "2", and "3" to prevent interference between the unit and other Pioneer components that are Setting Item Default Value Setting Details installed in the same room.
  • Page 66 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Firmware Update Setting Item Default Value Setting Details Update Notice Enable Availability of a firmware update will be notified via network. "Enable": Notify updates "Disable": Do not notify updates Version The current firmware version will be displayed.
  • Page 67: Mcacc Pro

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Full Auto MCACC MCACC Pro Place the supplied speaker setup microphone in the listening position, measure the test tones emitted by the speakers, then the unit automatically sets the optimum volume level for each speaker, the crossover frequencies, and the distance from the listening position.
  • Page 68: Remote Controller

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix on the remote controller, and the test tones are emitted again, and the unit automatically makes settings such as the optimum volume level and the crossover frequency. 5.
  • Page 69 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Manual MCACC Setting Item Default Value Setting Details Height 1 Right 0.0 dB Select a value between "−12.0 dB" and "+ When Full Auto MCACC is run, a variety of speaker settings are made automatically, 12.0 dB"...
  • Page 70 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Fine Speaker Distance Setting Item Default Value Setting Details Make fine adjustments to the distance of the speakers from the listening position while Subwoofer 1 0.0 dB Select a value between "−15.0 dB"...
  • Page 71 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Standing Wave Setting Item Default Value Setting Details This controls the affect of the standing waves that occur when sound waves reverberating Surround Left 10' 0"...
  • Page 72 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ EQ Adjust Setting Item Default Value Setting Details You can adjust the output volume of the range of each speaker while listening to test Subwoofer 0.0dB Control the effect of standing waves for the...
  • Page 73 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Setting Item Default Value Setting Details Front Right 0 dB After selecting the speaker frequency from between Height 1 Right 0 dB After selecting the speaker frequency from between "63 Hz"...
  • Page 74 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Setting Item Default Value Setting Details Setting Item Default Value Setting Details Height 2 Right 0 dB After selecting the speaker frequency from between Surr Back Right 0 dB After selecting the speaker frequency from between...
  • Page 75 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix • The result may not be as expected depending on the input source and listening mode setting. Setting Item Default Value Setting Details Surround Left 0 dB After selecting the speaker frequency from between "63 Hz"...
  • Page 76 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ EQ Professional Setting Item Default Value Setting Details You can automatically measure and calibrate the reverberation characteristics (how the Time Position 30 - 50 msec Specify the calibrated time position in the range sound echoes) of the room.
  • Page 77 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Precision Distance Setting Item Default Value Setting Details With the distance of the Front Left speaker from the listening position as the standard, Height 1 Right Move the speakers back and forth about a adjust the position of each speaker with a precision up to the closest 1 cm.
  • Page 78 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix MCACC Data Check Setting Item Default Value Setting Details Surround Right Move the speakers back and forth about a You can check the number of speaker channels connected and the content and values centimeter at a time in relation to the speaker you have set for each of the speaker settings.
  • Page 79 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Data Management You can change the name of the MCACC Memory, or copy or delete the settings you have made. ■ Memory Rename Change the name of the MCACC Memory. Setting Item Default Value Setting Details...
  • Page 80: Network/bluetooth

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Network Network/Bluetooth • When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting automatically. ("Enable" is set by default.) To assign fixed IP addresses to each components, you must set "DHCP"...
  • Page 81 The input password will be saved. Usage Data As a means of improving the quality of our products and services, Pioneer may collect information about your usage over the network. Select "Yes" if you agree to our collecting this information. Select "No"...
  • Page 82 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix • Wait for a while if "Network" cannot be selected. It will appear when the network feature is started. Setting Item Default Value Setting Details Pairing You can initialize the pairing information saved on Bluetooth...
  • Page 83: Av Adjust

    > Specifications > Specifications > Settings > Settings > Listening Modes > Playback Function > Listening Modes > Playback Function > Basic Manual > Basic Manual Troubleshooting | Appendix Troubleshooting | Appendix ■ Tone control calibrated in "MCACC Pro" - "Manual MCACC" - "Standing Wave.
  • Page 84 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix modes: Dolby Digital, Dolby Digital Plus, Dolby Surround, sources such as CDs, DVDs, and BDs, it is possible to Adjust the width of the sound field of the front channel Dolby TrueHD, Multichannel, DTS, DTS-ES, DTS 96/24, achieve a smoother and more refined sound.
  • Page 85: Control Function Settings

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ IR jack ■ 12V trigger output jack If you use a commercially available multiroom remote You can enable power link operation when you connect Control Function Settings control kit with this jack, you can operate the unit with the unit and an external device such as power amplifier...
  • Page 86: Connecting A Power Amplifier

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Setup" - "Miscellaneous" - "Preamp Mode". Connecting a Power Amplifier You can connect a power amplifier to the unit and use the unit as a pre-amplifier in order to produce a large volume that cannot be output with the unit only.
  • Page 87: Firmware Update

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix online documentation, regardless of legal theory, and Updating the Firmware via Network whether arising in tort or contract. Firmware Update In no event will our company be liable to you or any third Preparation: party for any special, indirect, incidental, or consequential •...
  • Page 88 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Error Code Updating via USB • *-01, *-10 : System Setup Ethernet cable not found. Connect the Ethernet cable Preparation: Input/Output Assign properly. • Prepare a 128MB or larger USB storage device. FAT16 •...
  • Page 89 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix • Make sure to copy the unzipped files. depending on the updated program. In that case, repeat from the beginning. check the progress on the display of the unit. The 4.
  • Page 90: Selecting Listening Modes

    > Specifications > Settings > Specifications > Settings > Listening Modes > Listening Modes > Playback Function > Playback Function > Basic Manual > Basic Manual Troubleshooting | Appendix Troubleshooting | Appendix ■ AUTO/DIRECT button ■ SURR button Press repeatedly and the listening modes suited to the By pressing repeatedly you can select the audio format Selecting Listening Modes input signal are switched between "Auto Surround",...
  • Page 91: Listening Mode Effects

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix by Dolby Laboratories, Inc. widely adopted for use in referred to as MLP, and it makes it possible to faithfully movie production. It is also a standard audio format on reproduce the master audio recorded in the studio.
  • Page 92 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ DTS 96/24 on Blu-ray Discs, based on 5.1ch, but with additional bitstream output. channels such as the Surround Back channel added This mode faithfully reproduces the sound design recorded ■...
  • Page 93 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix other sources containing multiplexed audio. ■ Multich PCM (Multichannel PCM) Mode suitable for playing sources recorded in multichannel PCM. ■ Rock/Pop Mode suitable for rock content. ■...
  • Page 94: Selectable Listening Modes

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Selectable listening modes Input Format Listening Mode Stereo Selectable Listening Modes Input Format Listening Mode Music files (except DSD/ Mono Dolby TrueHD) Analog Stereo Dolby Surround Mono...
  • Page 95 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Multich PCM Stereo Stereo Dolby Atmos Stereo • You can select the Multich PCM 1 1 2...
  • Page 96 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Dolby D Stereo Dolby D+ Stereo Dolby TrueHD Stereo Dolby D 1 2 Dolby D+ 1 2 Dolby TrueHD...
  • Page 97 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Stereo DTS 96/24 Stereo DTS Express Stereo 1 2 DTS 96/24 1 2 DTS Express 1 2 DTS Neural:X...
  • Page 98 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS-HD HR Stereo DTS-HD MSTR Stereo DTS-ES Stereo DTS-HD HR 1 2 DTS-HD MSTR 1 2 1...
  • Page 99 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Input Format Listening Mode DTS:X Stereo DTS:X Classical 1 Unplugged 1 Ent.Show 1 Drama 1 AdvancedGame 1 Action 1 Rock/Pop 1 Sports 1 Ext.Stereo 2 Ext.Mono 2...
  • Page 100: Am/fm Radio

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix To return to the auto tuning mode: Presetting a Radio Station LINKS Press MODE on the remote controller again so that AM/FM radio "TunMode:Auto" appears on the display. The unit tunes It allows you to register up to 40 of your favorite AM/FM automatically into a radio station.
  • Page 101 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Using RDS (European, Australian and Asian Easy M (Middle of the road music) Light M (Light classics) models) Classics (Serious classics) Other M (Other music) RDS stands for Radio Data System and is a method of Weather transmitting data in FM radio signals.
  • Page 102: Usb Storage Device

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Operations with the remote controller: : Repeat One Track : Repeat within a folder USB Storage Device : Shuffle ■ USB Storage Device Requirements ■...
  • Page 103 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Supported Audio Formats 96 kHz, 176.4 kHz, 192 kHz • Quantization bit: 16 bit, 24 bit For server playback and playback from a USB storage DSD (�dsf/�dff/�DSF/�DFF): device, this unit supports the following music file formats.
  • Page 104: Internet Radio

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Operations with the remote controller: top list on the unit, and then enter your user name and password. Internet Radio • If you associate the device on My Page within the TuneIn Radio website using the registration code obtained by selecting "Login"...
  • Page 105 : Pressed during play this button pauses pandora.com/pioneer. Enter your activation code and playback. Pressed while paused, and it restarts play. then follow the instructions to create your Pandora : This button plays the next track.
  • Page 106: Spotify

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Operations with the remote controller: Spotify ■ Icons on the display : Playing This unit supports Spotify Connect. To enable Spotify Connect, install the Spotify application on your smartphone : Pause or tablet and create a Spotify premium account.
  • Page 107: Music Server

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Configuring the Windows Media Player Play Music Server ■ Windows Media Player 11 1. Start the server (Windows Media Player 11, Windows Media Player 12, or NAS device) containing the music 1.
  • Page 108 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix levels deep. Controlling Remote Playback from a PC : Playing • Depending on the media server, the unit may not : Pause recognize it, or may not be able to play its music files. You can use this unit to play music files stored on your PC by operating the PC inside your home network.
  • Page 109 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix from the "Play to" window on the PC. The playback Supported Audio Formats • Quantization bit: 16 bit screen is displayed on the TV connected to the Apple Lossless (�m4a/�mp4/�M4A/�MP4): HDMI output of the unit.
  • Page 110: Troubleshooting

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix Power The temperature inside the unit has exceeded the LINKS admissible value. Make sure the unit has plenty Troubleshooting ■ Cannot turn on the unit of space for ventilation around it, wait for the unit to cool down sufficiently, and then try turning it on •...
  • Page 111 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ No sound from a connected player ■ Cannot select a desired listening mode subwoofer rather than the front speakers. We do not • Change the input selector on this unit to the position of recommend changing this if your front speakers have •...
  • Page 112 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Images flicker Video Tuner • It is possible that the resolution of the player is not compatible with the TV's resolution. If you have ■...
  • Page 113 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix ■ Cannot access the network server BLUETOOTH function Network function • This unit needs to be connected to the same router as the network server. •...
  • Page 114 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix USB storage device Wireless LAN Network on the radio wave. • When other wireless LAN devices are used near the ■ USB storage device is not displayed unit, several issues such as interrupted playback •...
  • Page 115 > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix necessary. • If the unit is installed in a rack or cabinet with colored- glass doors or if the doors are closed, the remote controller may not work reliably.
  • Page 116: Reference Information

    > Specifications > Settings > Listening Modes > Playback Function > Basic Manual Troubleshooting | Appendix • The AV receiver uses radio wave, and a third person produce a variety of reflected waves as well as variation LINKS can receive the wave on purpose or accidentally. Do not in reception condition depending on locations.
  • Page 117 , 104-0028, ЯПОНИЯ © 2016 Onkyo & Pioneer Corporation. All rights reserved. © 2016 Onkyo & Pioneer Corporation. Tous droits de reproduction et de traduction réservés. F1607-0 “Pioneer” and “MCACC logo” are trademarks of Pioneer Corporation, and are used under license.

This manual is also suitable for:

Sc-lx801Sc-lx701

Comments to this Manuals

Symbols: 0
Latest comments: