Using The Av Direct Mode; Using “Av Direct Net Off” - Pioneer SC-LX904 Instruction Manual

Using the AV Direct mode

Contents Connections
≫
AV Direct can improve sound quality by limiting the activity of digital circuits and
thereby suppressing the noise that is generated by them. You can choose from
"AV Direct" which temporarily stops communications such as via the network,
Bluetooth, and USB, and "AV Direct Net Off" which turns off the power for some
digital circuits. Either one can be used to play the audio from external devices
connected to the input terminals on this unit.
• This function is not available with a source to which a Sonos Connect (
p115) is connected.
Using "AV Direct"
1. Press the "AV DIRECT" button on the remote controller to turn "AV Direct"
"On". To turn "Off", press the "AV DIRECT" button again.
• "AV Direct" automatically switches off when you perform any of the following
operations:
– Set this unit to standby.
– Switch the input source to "NET", "BLUETOOTH", "USB", or "TUNER".
– Select a source to which a Sonos Connect (
– Display the Setup menu.
– Switch the multi-zone function on.
• Depending on the functions used, the track name may be displayed on the
display and "Off" for "AV Direct" may not be displayed.
Using "AV Direct Net Off"
1. While pressing and holding ZONE CONTROL on the main unit, press STATUS
so that "AV Direct Net Off" appears on the display of the main unit. The power
of some of the digital circuits are turned "Off".
• "AV Direct Net Off" is automatically canceled when you perform any of the
following operations:
– Set this unit to standby.
– Switch the input source to "NET", "BLUETOOTH", "USB", or "TUNER".
– Select a source to which a Sonos Connect (
– Display the Setup menu.
– Switch the multi-zone function on.
131
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
p115) is connected.
p115) is connected.
≫