Linked Operation Troubles; Tuner Troubles; Images Flicker; Video And Audio Are Out Of Synch - Pioneer SC-LX904 Instruction Manual

• To display video from the connected player on the TV while the unit is in standby, you need to enable "System Setup" - "Hardware" - "HDMI" -
"HDMI Standby Through" in the Home screen. For details of the HDMI Standby Through function, refer to "System Setup" - "Hardware" - "HDMI".
• To output video to a TV connected to the HDMI OUT SUB jack, press the
"HDMI" - "HDMI Out", or press the HDMI MAIN/SUB button on the remote controller. Then, select the HDMI OUT jack for output.
• Check if "Resolution Error" is displayed on the main unit display when video input via HDMI IN jack is not displayed. In this case, the TV does not
support the resolution of the video input from the player. Change the setting on the player.
• If the "Audio Exclusive Mode" (
on the TV screen. Check that this is Off.
• Normal operation with an HDMI-DVI adapter is not guaranteed. In addition, video signals output from a PC are not guaranteed.
‰ The video and audio output is slow from a source connected to an HDMI input terminal
• If the "Audio Exclusive Mode" (
when displaying or hiding "System Setup". If this occurs, change the resolution setting for video output on the connected device to a fixed value
such as 1080p, rather than "Auto".
‰ Images flicker
• The output resolution of the player may not be compatible with the resolution of the TV. If the player is connected to this unit with an HDMI cable,
change the output resolution on the player. Also this may be solved by changing the screen mode on the TV.
‰ Video and audio are out of synch
• Depending on the settings on your TV and connection environment, the video may be behind the audio. To adjust, press
controller, and adjust in "HDMI" - "Sound Delay" in the "AV Adjust".

„ Linked operation

‰ HDMI linked operation does not work with CEC-compliant devices, such as a TV
• In the Home screen of the unit, set "System Setup" - "Hardware" - "HDMI" - "HDMI CEC" to "On".
• It is also necessary to set HDMI linking on the CEC-compliant device. Check the instruction manual.
• When connecting a Sharp brand player or recorder to the HDMI IN jacks, set "System Setup" - "Hardware" - "HDMI" - "HDMI Standby Through" to
"Auto".

„ Tuner

‰ Poor reception or much noise
p198) for the device connected to the HDMI IN 2 is on, the video signal output is stopped and nothing is shown
p198) for the device connected to the HDMI IN 2 is on, it may take some time for video and audio to be output
Contents Connections
≫
button on the remote controller to display "AV Adjust" and select
213
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
( p167)
( p198)
on the remote
p167)
(
≫