Bluetooth - Pioneer SC-LX904 Instruction Manual

Bluetooth

Setting Item Default Value Setting Details
Bluetooth On Select whether or not to use the BLUETOOTH
function.
"On": Enables connection with a BLUETOOTH
wireless technology enabled device by using the
BLUETOOTH function. Select "On" also when
making various BLUETOOTH settings.
"Off": When not using the BLUETOOTH function
Auto Input On When a BLUETOOTH-enabled device is played
Change while it is connected to the unit, the input of the unit
can be automatically switched to "BLUETOOTH".
"On": The input is automatically set to
"BLUETOOTH" responding to the playback
operation of the BLUETOOTH-enabled device.
"Off": The function is disabled.
• If the input is not switched automatically, set to
Auto Reconnect On This function automatically reconnects to the
BLUETOOTH wireless technology enabled device
connected last when you change the input to
"BLUETOOTH".
"On": When this function is used
"Off": When this function is not used
• This may not work with some BLUETOOTH
Contents
"Off" and change the input manually.
wireless technology enabled devices.
Connections
≫
Setting Item Default Value
Pairing -
Information
Device -
Status -
• Wait for a while if "Bluetooth" cannot be selected. It will appear when the BLUETOOTH
function is started up.
197
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
You can initialize the pairing information saved on
this unit.
Pressing ENTER when "Clear" is displayed
initializes the pairing information stored in this unit.
• This function does not initialize the pairing
information on the BLUETOOTH wireless
technology enabled device. When pairing the
unit again with the device, be sure to clear
the pairing information on the BLUETOOTH
wireless technology enabled device in advance.
For information on how to clear the pairing
information, refer to the BLUETOOTH wireless
technology enabled device's instruction manual.
Displays the name of the BLUETOOTH wireless
technology enabled device connected to the unit.
• The name is not displayed when "Status" is
"Ready" and "Pairing".
Displays the status of the BLUETOOTH wireless
technology enabled device connected to the unit.
"Ready": Not paired
"Pairing": Paired
"Connected": Successfully connected
≫