Pioneer SC-LX904 Instruction Manual page 196

Setting Item Default Value Setting Details
AirPlay Device Pioneer SC- Change the model name of this unit which is
Name LX904 XXXXXX displayed on the AirPlay-connected device to an
easily recognized name.
1. Press ENTER to display the Edit screen.
2. Select a character or symbol with the cursors
3. After inputting, select "OK" with the cursors and
• This function cannot be used when registering
Contents
and press ENTER.
Repeat it to input 31 or less characters.
"A/a": Switches between upper and lower cases.
(Pressing MODE on the remote controller also
toggles between upper and lower cases.)
"←" "→": Moves the cursor in the arrow direction.
" ": Removes a character on the left of the
cursor.
" ": Enters a space.
• Pressing CLEAR on the remote controller will
remove all the input characters.
press ENTER.
The input name will be saved.
this unit to Home App.
Connections
≫
Setting Item Default Value
AirPlay Password
Privacy Statement Not Accepted
Network Check -
• Wait for a while if "Network" cannot be selected. It will appear when the network feature
is started.
196
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
You can set a password of up to 31 characters so
that only registered users can use AirPlay
1. Press ENTER to display the Edit screen.
2. Select a character or symbol with the cursors
and press ENTER.
Repeat it to input 31 or less characters.
"A/a": Switches between upper and lower cases.
(Pressing MODE on the remote controller also
toggles between upper and lower cases.)
"←" "→": Moves the cursor in the arrow direction.
" ": Removes a character on the left of the
cursor.
" ": Enters a space.
• To select whether to mask the password with
"" or display it in plain text, press +Fav on
the remote controller.
• Pressing CLEAR on the remote controller will
remove all the input characters.
3. After inputting, select "OK" with the cursors and
press ENTER.
The input password will be saved.
• This function cannot be used when registering
this unit to Home App.
When using a network service that requires a login
name, email address, password, etc., you need to
agree to the Privacy Statement of our company.
• This setting can be made after confirming the
Privacy Statement. When you select "Privacy
Statement" and press ENTER, the Privacy
Statement is displayed.
• When "Not Accepted" is selected, you will log out
from the network service you have logged in.
You can check the network connection.
Press ENTER when "Start" is displayed.
≫
.
®