Installing Your Speaker System - Pioneer Elite SC-91 Operating Instructions Manual

03

Installing your speaker system

At the very least, front left and right speakers only are necessary. Note that your main surround speakers should
always be connected as a pair, but you can connect just one surround back speaker if you like (it must be con-
nected to the left surround back terminal).
Standard surround connection
! When only connecting one surround back speaker, connect it to the SURROUND BACK L (Single) terminals.
The top middle terminals can also be used for the front wide and Speaker B speakers.
7.2 ch/5.2.2 ch setting
Top middle right
7.2 ch SB/FW setting
Front wide right
Speaker B - right
Front right Subwoofer 1
LINE LEVEL
INPUT
PRE OUT
SUBWOOFER
1
2
A
FRONT CENTER TOP MIDDLE /
R L R
SELECTABLE
Surround back speaker terminals can be
used to connect to the sub zone.
7.2 ch/5.2.2 ch setting
Surround back right
7.2 ch SB/FW setting
Surround back right
Surround right
Surround back right
ZONE 2 - Right
HDZONE - Right
Top middle left
Front wide left
Speaker B setting
Speaker B - left
Center Subwoofer 2
LINE LEVEL
INPUT
PRE OUT
SUBWOOFER
1
2
A FRONT CENTER TOP MIDDLE / B SURROUND BACK SURROUND A
R L R L R L R L
(Single)
SELECTABLE
SPEAKERS
B A
SURROUND BACK SURROUND
L R L R
(Single)
SPEAKERS
Surround back left
Surround back left
Speaker B setting
Surround back left
ZONE 2 setting
ZONE 2 - Left
HDZONE setting
HDZONE - Left
Dolby Enabled Speaker
Dolby enabled speakers bring a new sense of height and immersion to the listening experience without installa-
tion of overhead speakers.
The front or surround speaker and Dolby Enabled Speaker are explained as one product group for the following
connections. Connect the Standard surround connection
Front left
a Dolby Enabled Speaker as an independent product.
L
Surround left
24
Connecting your equipment
Ceiling
Dolby Enabled
Listener
Speaker
on page 24 of the TOP MIDDLE terminal when using