Animo OptiBean Service Book page 24

OptiBean (XL)
Service menu continued ...
Main item Sub-item Item
2.4 Settings Coin system None
(continued...)
G13
Coin channel 1
Coin channel 6
Single vend
Max coin
acception
Point position
Show credit
MDB
Single vend
Max coin
acception
Point position
Show credit
Purchase
obligation
Pre paid
Cash and Card
I/0 reset counters
I/0 Quick recipe
Drip tray signal
Demo modus
Range Set Description
No payment system connected
Coin value per channel setting.
€ 0.05
€ 0.10
Resp. € 0.05 to € 2.00.
0-100.00 + € 0.20
0.00 = free
Token € 0.50
TOKEN = coffee coin.
€ 1.00
€ 2.00
Yes: any excess money inserted is
yes-no yes not kept for the following drink. No:
is kept for the following drink.
Insertions higher than, for example,
€ 2.00 will be refused and returned
€ 0.05-
€ 2.00 via the coin groove of the coin me-
100.00
chanism. Set to the highest recipe
product price.
The position of the decimal point in
0-2 2
the amount.
yes-no yes Display credit (Cr.) on the display
Yes: any excess money inserted is
not kept for the following drink. No:
yes-no yes
is kept for the following drink.
Insertions higher than, for example,
€ 2.00 will be refused and returned
€ 0,05-
€ 2,00 via the coin groove of the coin me-
100,00
chanism. Set to the highest recipe
product price.
The position of the decimal point in
0-2 2
the amount.
yes-no yes Show credit (Cr.) on the display.
Whether money is returned or not
yes-no yes
when the return handle is pressed.
Whether or not a drink selected can
yes-no no be made after suf¿ cient money has
been inserted.
yes: when Y-cable is used for
Yes/no No coin- and card system on one MDB
connection
Add menu item Reset counters to
yes-no no
the operator menu.
Menu item Snelrecept aan het
yes-no no
operatormenu toevoegen
Deactivate the drip tray sensor
yes-no yes
warning in the software.
This function can be used when
the machine is in a showroom or
at a trade fair. The machine does
not then need to be connected to a
yes-no no
water supply. In the display, DEMO
is shown on the bottom line. Keys,
LEDs and the Display operate
normally.
46 2013/08 Rev. 0.5
OptiBean (XL)
Service menu continued ...
Main item Sub-item Item
2.4 Settings Stop button
(continued...)
Direct choice
Free vend
I/0 Free vend
2.5 Reset counters Service counters Rinse counter?
Clean counter?
Recipe counters Recipe counter 1
Recipe counter 12
Reset total counter
Reset all counters
2.6 Service boiler Service moment
Service counter
Reset service
counter
Water hardness table Water
quality
°D
Very hard 18-30
Hard 12-18
Average 8-12
Soft 4-8
Very soft 0-4
2013/08 Rev. 0.5
Range Set Description
If this function is set to Yes, the in-
stant products can be stopped using
the stop button.
yes-no yes Hot water (and cold water) can also
be stopped. If fresh coffee is being
made (brewer) the recipe will simply
be completed.
If this function is set to Yes, the
chosen product will be started im-
yes-no no mediately, without the start key being
pressed.
Strength setting is possible.
Set the machine for free or paid
yes-no yes
vending.
Add/remove menu item 1.0 Free
yes-no yes
vend to the operator menu.
Reset rinse counter.
Reset cleaning counter.
Reset recipe counters for each
recipe.
Reset total counters.
Reset all counters at once.
0-50.000 12.500 After reaching the set service
moment, the message Service
boiler appears in the display on
switching on.
See also Chapter 5 Service.
12.500 The total number of drinks vended
is counted down here. It can be
checked here at any time how far
waya the machine is from periodic
0
maintenance (boiler descaling or
water ¿ lter replacement).
When the counter reaches 0 it conti-
-12.500
nues with a negative count.
After periodic maintenance has
been carried out (boiler descaled or
¿ lter replaced) the service counter
must be set to zero.
Hardness Scale
indicator cups
°F °K mmol/l mgCaCo3/l
32-55 11-18 3.2-5,3 321- 536 5,000
22-32 7-18 2.2-3.2 214-321 8,500
15-22 5-7 1.4-2.2 268-214 12,500*
7-15 2-5 0.7-1.4 72-268 20,500
0-7 0-2 0- 0.7 0-72 0 = off
47
GB