Table of Contents
Advertisement
Description of this Upgrade
Step 7. Install the Service Center's N5242-60133 Solid-State Disk Drive Assembly
(SSDA) with A.10.40 or above—(Windows XP OS Only)
Step 7. Install the Service Center's N5242-60133 Solid-State Disk
Drive Assembly (SSDA) with A.10.40 or above—(Windows XP OS
Only)
IMPORTANT! If your instrument already had a Windows 7 operating system
and already had a Version 7 CPU prior to this upgrade, skip to
Remove the Front Panel Assembly" on page
Install the service center's SSDA with A.10.40 or above, into the analyzer by
referring
www.keysight.com.
If the PNA's serial number is 4742 or below, the display and touchscreen
may not initially work. This is normal. This issue will be fixed when the new
front panel is installed.
Figure 3
Service Center's Solid-State Disk Drive Assembly (SSDA) with A.10.40 or
above
Installation Note N5242-90023
Figure 3
and to your instrument's Service Guide on
"Step 10.
32.
N5242-60133
29
Advertisement
Chapters
Table of Contents
