N5242 - Keysight Technologies N524 A Series Installation Note

Description of this Upgrade
Step 16. Install the New Front Panel Assembly and the Lower Overlay
8. If equipped with front panel jumpers, reinstall the semi-rigid jumpers
9. If available, install the jumper covers (not shown).
Figure 13
Install front panel jumpers
42
(Figure 13) on the front panel using a 5/16 inch torque wrench set to
8 in-lbs (N5247B only) and 10 in-lbs (N5241/2/4/5/9B).
Installation Note N5242-90023