Table of Contents
Advertisement
Description of this Upgrade
Step 16. Install the New Front Panel Assembly and the Lower Overlay
3. Hand start the twelve screws (item 0515-2044) in the sides of the frame.
4. Install 0515-1946 (x4) screws into lower front panel. Do not torque. Refer
Figure 11
New Front Panel Assembly Torque Screws
5. Torque the twelve 0515-2044 screws in the order shown in
6. Torque the two 0515-1946 screws (2-port) or four 0515-1946 screws
40
Use the new screws from the kit and those retained earlier. Do not torque.
Refer to
Figure 10 on page 39
to
Figure
11.
page
39.
(4-port) to 9 in-lbs. 4-port is shown, refer to
and
Figure
11.
Figure
11.
Installation Note N5242-90023
Figure 10 on
Advertisement
Chapters
Table of Contents
