Keysight Technologies N524 A Series Installation Note page 8

Description of this Upgrade
Getting Prepared
2. In the Keysight License Manager welcome window, click You can add a
3. In the "Keysight Software Manager: Add Certificate" window that opens, in
4. Click Continue (to return to the Keysight Software Manager welcome
5. If there are multiple "A" model PNAs that are being upgraded to a "B"
6. In the Keysight Software Manager welcome screen, click "You can request
7. In the "Keysight Software Manager: Request Licenses" window that opens,
8. Click Add a new License Notifier Host ID host...
9. In the License Notifier Host ID: box that is displayed, enter your
10. In the Select the licenses to assign section, scroll down until you see a
IMPORTANT: To avoid the loss of an option license, ensure that you only
have a single Option 690 upgrade checked.
11. Click Assign Licenses
12. In the "Assigned licenses:" section that opens, listing all of the License
6
new certificate.
the "Enter your certificate information" section, refer to your Software
License Certificate that you received with your upgrade kit and enter the
following:
— Order Number
— Certificate Number
screen).
model, repeat steps 3
Else, continue to next step.
new licenses".
in the "Select the host to assign licenses to" section, click the Click to add
or select a host drop-down.
instrument's model and serial number, separated by only a comma—no
spaces). Example:
— New License Host Notifier Host ID host: N5242A,MY12345678
Option 690 upgrade with your instrument's "A" and "B" model values—
similar to this example—and then click the box to select:
— N5247AU-690 Upgrade N5247A to N5247B
Notifier Host IDs and associated instrument information, verify the
following:
— License Notifier Host ID: contains the correct "B" model and serial
number
— the associated N52xxAU-690 Upgrade lists the correct "A" model to
"B" model
and 4.
Installation Note N5242-90023