Unpacking Instructions; Hardware Configuration - Motorola MVME2700 Series Installation And Use Manual

Unpacking Instructions

Note
Unpack the equipment from the shipping carton. Refer to the packing list
and verify that all items are present. Save the packing material for storing
and reshipping of equipment.
Avoid touching areas of integrated circuitry; static discharge can damage
!
these circuits.
Caution

Hardware Configuration

To produce the desired configuration and ensure proper operation of the
MVME2700, you may need to carry out certain hardware modifications
before installing the module.
The MVME2700 provides software control over most options: by setting
bits in control registers after installing the module in a system, you can
modify its configuration. The MVME2700 control registers are described
in Chapter 3, Functional
Series Single Board Computer Programmer's Reference Guide listed
under
Some options, however, are not software-programmable. Such options are
controlled through manual installation or removal of header jumpers or
interface modules on the base board or the associated transition module.
http://www.motorola.com/computer/literature
If the shipping carton is damaged upon receipt, request that the
carrier's agent be present during the unpacking and inspection of
the equipment.
Description, and/or in the MVME2600/2700
Appendix D, Related Documentation.
Unpacking Instructions
1-5
1