Motorola MVME2700 Series Installation And Use Manual page 170

CNFG and ENV Commands
6
6-6
NVRAM Bootlist (GEV.fw-boot-path) Boot Enable [Y/N] = N?
Y
N
Note When enabled, the GEV (Global Environment Variable) boot
takes priority over all other boots, including Autoboot and
Network Boot.
NVRAM Bootlist (GEV.fw-boot-path) Boot at power-up only [Y/N] = N?
Y
N
NVRAM Bootlist (GEV.fw-boot-path) Boot Abort Delay = 5?
The time in seconds that a boot from the NVRAM boot list delays before
starting the boot. The purpose for the delay is to allow you the option of
stopping the boot by use of the <Break> key. The time value is from 0-255
seconds. (Default = 5 seconds)
Auto Boot Enable [Y/N] = N?
Y
N
Auto Boot at power-up only [Y/N] = N?
Y
N
Give boot priority to devices defined in the fw-boot-
path global environment variable (GEV).
Do not give boot priority to devices listed in the fw-
boot-path GEV. (Default)
Give boot priority to devices defined in the fw-boot-
path GEV at power-up reset only.
Give power-up boot priority to devices listed in the
fw-boot-path GEV at any reset. (Default)
The Autoboot function is enabled.
The Autoboot function is disabled.(Default)
Autoboot is attempted at power-up reset only.
Autoboot is attempted at any reset.(Default)
Computer Group Literature Center Web Site