Hardware Preparation and Installation
1
1-48
Figure 1-20. RAM200 Placement on MVME2700
5. Insert the four short Phillips screws through the holes at the corners
of the RAM200, into the standoffs on the MVME2700. Tighten the
screws.
6. Reinstall the MVME2700 assembly in its proper card slot. Be sure
the module is well seated in the backplane connectors. Do not
damage or bend connector pins.
7. Replace the chassis or system cover(s), reconnect the system to the
AC or DC power source, and turn the equipment power on.
Computer Group Literature Center Web Site
11871.00 (1-3) 9710